 |
 |
 |
 |
Solis > 5kW 220/240 VAC Single Phase Residential Hybrid Storage Inverter
The Solis S-6 single phase residential hybrid storage inverter is extremely efficient, increasing the amount of electricity generated and recover investment returns more quickly. The Solis S6 is suitable for the installation of single-phase input PV system of different types; residential, commercial and industrial and adopt ultra-high switching frequency, ultra-thin single four-layer board design can greatly reduce the risk caused by the connector. The EPM can be equipped with built-in counter-current controller, which supports multiple communication modes such as RS485, WIFI, GPRS, Ethernet and so on. Real-time monitoring and information control can be utilized.
Model
|
S6-EH1P5K-H-US-RSS*
* RSS (Tigo MLRSD Transmitter)
|
Series
|
Solis Single Phase Hybrid Energy Storage Inverter
|
Manufacturer
|
Solis
|
Mechanical / General Data
Type
|
Single Phase Residential Hybrid Storage Inverter
|
Dimensions (W x H x D)
|
19.2" W x 25.5" H x 9.0" D
(488 mm W x 647 mm W x 228.5 mm D)
|
Weight
|
44.1 lbs
(20 kg)
|
Topology
|
Transformerless
|
Operating Temperature Range
|
-31 °F to 140 °F (-25°C to 60°C)
|
Ingress protection
|
NEMA 4X (IP66)
|
Cooling concept
|
Natural Convection
|
Max. operation altitude
|
13,120 ft (4000 m)
|
Compliance
|
UL1741SB, UL1741SA, IEEE 1547-2018, UL1699B, UL1998, FCC Part15 ClassB, California Rule 21, Heco Rule 14H, NEC 690.12-2020, CAN/CSA C22.2107.1-1
|
Generator support
|
Yes; up to 25 kW (with a Solis Power Hub)
|
Shipping Method
|
Freight |
Input (DC)
Max Voltage
|
600 V
|
Rated MPP voltage range
|
380 V
|
Start-up voltage
|
80 V
|
MPPT voltage range
|
80-520V
|
Max.input current
|
16 A
|
Max. short circuit current
|
25.6 S
|
MPPT number/Max. input strings number
|
3/1
|
Energy Storage
Battery type
|
Lithium-ion
|
Battery voltage range
|
120-500 V
|
Max. charge / discharge current
|
25 A
|
Communication
|
CAN/RS485
|
Number of batteries per inverter
|
See Battery Compatibility Sheet
|
AC Output (Grid)
Rated output power
|
5000 W (5.0kW)
|
Max. apparent output power
|
5 kVA
|
Rated grid voltage
|
220V / 240 V
|
Rated grid frequency
|
60Hz
|
Rated grid output current
|
22.7 A / 20.8 A
|
Max. output current
|
22.7 A / 20.8 A
|
THDi
|
<3%
|
AC Input (Grid)
Input voltage range
|
193.6-242 V / 211-264 V
|
Max. input current
|
34.1 A / 31.2 A
|
Frequency range
|
59.5-60.5 Hz / 59-61Hz
|
AC Output (Backup and Off-grid)
Rated output power
|
5 kW
|
Max. apparent output power
|
8 kVA, 10 sec
|
Back-up switch time
|
<10 ms
|
Phase power
|
220 V / 240 V Split-Phase
|
Rated output voltage (L1-L2)/(L1/L2-N)
|
220 V / 240 V
|
AC output voltage range
|
193.6-242 V / 211-264 V
|
Rated grid frequency
|
60 Hz
|
Frequency range
|
55-65 Hz
|
Rated AC output current
|
22.7 A / 20.8 A
|
Max. output overcurrent protection, 10 sec
|
36.4 A / 33.3 A
|
Max. allowable phase imbalance
|
100%
|
Backup support configurations
|
Dedicated loads and whole-home (with a Solis Power Hub)
|
Power factor
|
>0.99 (0.8 leading - 0.8 lagging)
|
THDv (@linear load)
|
<3%
|
Efficiency
Max. efficiency
|
97.6%
|
EU efficiency
|
97.2%
|
BAT charged by PV Max. efficiency
|
98.5%
|
BAT charged/discharged to AC Max. efficiency
|
97.0%
|
Protection
Ground fault detection
|
Yes
|
Residual (leakage) current detection
|
Yes
|
Integrated AFCI (DC arc-fault circuit protection)
|
Yes
|
DC reverse-polarity protection
|
Yes (PV only)
|
Rapid Shutdown NEC 2017
|
Integrated SunSpec-certified Transmitter
|
Compatible RSD Receivers
|
See MLRSD Compatibility Sheet
|
Protection class/Over voltage category
|
I/II
|
Features
DC connection
|
1 in. knockouts for conduit (x2) on the side and bottom; Spring clamp terminals
|
AC connection
|
2 in. knockouts for conduit (x3) on the side and bottom; Spring clamp terminals
|
Interface
|
LED indicator lights, Bluetooth/Phone app
|
Monitoring platform
|
SolisCloud (modbus map and API sharing available upon request)
|
Communication
|
RS485, Optional: Cellular, Wi-Fi
|
Additional Product Features
Highly Flexible
- Can be used for both whole-home and dedicated loads backup systems
- Four MPPTs allows for versatile PV array design
- Provides split-phase backup power up and is stackable up to ten inverters in parallel
- UL 9540 certified with multiple battery brands to provide up to 80 kWh of storage capacity per inverter
- Has peak shaving, energy arbitrage, selfconsumption, backup, and off-grid modes
- California Rule 21 and HECO listed with the UL 1741 SB and UL 1741 PCS certifications
Efficient Performance
- Maximum PV input current up to 16A per string
- High DC:AC ratio of 1.6 for more PV power capacity
- Generates up to 50A/11.4kW of continuous backup
power with just one inverter
- Transfer time is < 10ms for all backed up loads
- DC to DC battery charging for optimal use of PVgenerated
energy
Intelligent Design
- SunSpec modbus certified with the latest SunSpec models
- Connect up to 10 inverters in parallel with energy monitoring and export power control
- Supports generate interconnection and allows the generator to function as the grid source if utility power is lost
- Capable of frequency-watt control for interoperability with other smart devices
- Offers all of the smart inverter functions detailed in IEEE 1547-2018
- Utilizes an energy management system that maximizes efficiency and offers multiple operating modes
- Solis app allows for remote system configuration and firmware
upgrading
Safe and Reliable
- Reverse DC polarity protection and software-based AFCI detection
- NEC 2017 compliant with multiple integrated PLC transmitter options available
- Fanless design using convection cooling for lower failure rate and complexity
- Third-party tested and validated for product reliability
|
|
 |
 |
 |
 |
|
 |

|