SolarEdge > 960 Watt Commercial Power Optimizer
MC4 Input Connectors, MC4 Compatible Output Connectors, for two 72 cell solar panels, 1000 Max Vdc
2:1 Optimizer, 960W/125V - Commercial Inverters only - 208V/480V
Note: It is not allowed to mix S-series and P-series Power Optimizers in new installations.
The SE-P960 is designed for commercial compliance with NEC 2017 AFCI and PV RSS requirements. Each optimizer includes two module DC inputs operating in parallel. Max system voltage of 1000V, max input voltage of 60VDC.
Specifications
|
Model
|
P960-4NDZMRZ
|
|
Manufacturer
|
SolarEdge
|
Mechanical
|
Type
|
Commercial Power Optimizer
(for 2 x 72 cell PV modules)
|
|
Operating Temperature Range
|
-40° C to +85° C
|
|
Compatible SolarEdge Inverters
|
Three phase inverters
|
|
Maximum Power per String
|
15,300 W
|
|
Parallel Strings of Different Lengths or Orientations
|
Yes
|
|
Enclosure
|
IP68 / NEMA6P
|
|
Input Connector
|
MC4
|
|
Dimensions (W x H x D)
|
5.1" x 6.61" x 2.32"
|
|
Weight
|
2.34 lbs
|
|
Shipping Method
|
Ground
|
Input (DC)
|
Rated Input Power
|
960 W
|
|
Connection Method
|
Dual input for independently connected modules
|
Absolute Maximum Input Voltage
(Voc at lowest temperature)
|
60 VDC
|
|
MPPT Operating Range
|
12.5 - 60 VDC
|
|
Maximum Short Circuit Current (Isc)
|
23 ADC
|
|
Maximum Short Circuit Current per Input (Isc)
|
11.5 ADC
|
|
Maximum Efficiency
|
99.5%
|
|
Weighted Efficiency
|
98.6%
|
|
Overvoltage Category
|
II
|
Output (DC)
|
Maximum Output Current - During Operation
|
18 ADC
|
|
Maximum Output Voltage
|
80 VDC
|
Product Description
The SolarEdge power optimizer is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box. The SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually. Furthermore, the power optimizers monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal for enhanced, cost-effective module-level maintenance. Each power optimizer is equipped with the unique SafeDC™ feature which is designed to automatically shut down modules' DC voltage whenever the inverter or grid power is shut down (unless connected to a StorEdge Inverter that is in backup mode).
The MPPT per module allows for flexible installation design with multiple orientations, tilts and module types in the same string. When working with SolarEdge Inverters, SolarEdge power optimizers automatically maintain a fixed string voltage, allowing installers even greater flexibility with longer strings and strings of different lengths in order to design optimal PV systems. The SolarEdge power optimizers are compatible with c-Si and thin-film modules and have a 25 year warranty.
Features:
PV power optimization at the module-level -
The most cost-effective solution for commercial and large field installations
- Specifically designed to work with SolarEdge inverters
- Up to 25% more energy
- Superior efficiency (99.5%)
- Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer string lengths possible
- Fast installation with a single bolt
- Advanced maintenance with module-level monitoring
- Module-level voltage shutdown for installer and firefighter safety
- Meets NEC requirements for arc fault protection (AFCI) and Photovoltaic Rapid
- Shutdown System (PVRSS)
- Use with two PV modules connected in parallel
