Request a Quote!

  Home > Manufacturers > Midnite Solar >

Midnite Solar MNSW4048-CL150 > 3.4kW Pre-Wired Conext SW 4048 48 VDC 120/240 VAC Inverter System

Midnite Solar MNSW4048-CL150 > 3.4 kW Pre-Wired Conext SW 4048 48 VDC 120/240 VAC Inverter System
Midnite Solar 3.4 kW Pre-Wired Inverter System

Alternative Views:

Our Price: $5,340.00
Warranty: 5 Years
Compliance: Buy American

Availability: This item has a lead time of 3-4 weeks.
Call for availability.
Product Code: MIDNITE-MNSW4048-CL150

Description Datasheet

Midnite Solar 3.4 kW Watt Pre-Wired Conext SW 4048 48 VDC 120/240 VAC Inverter System for Off Grid

MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the Schneider Electric Conext SW inverter that is rated at 4,000 watts and uses a 48 volt battery. It produces 120/240 volts AC. Dont forget to look at our other products that compliment the pre-wired inverter system like Midnite's Battery Boxes or Disconnecting Combiners. Midnite's pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Below is a simple list of the major components included in the system.

The Whizbang Jr (MNWBJR) current sense module for Classic provides battery state of charge and is included with this product.

Model MNSW4048-CL150
Series Off-Grid Pre-Wired System
Manufacturer Midnite Solar
Application 120/240 VAC | 50 / 60 Hz selectable
Inverter Model 1x Schneider Electric Conext SW 4048
Charge Controller Midnite Solar Classic 150
Dimensions 40" L x 29" W x 14.5" H
Weight 130 lbs
Shipping Method Freight

NOTE: Midnite uses a 175 amp main breaker on this system so you can use 2/0 battery cable, Schneider uses the 250 amp breaker on all of the SW inverters because they have them and donít stock the 175ís. The 250 is fine but it forces you to install 4/0 cable and the continuous current draw on this inverter is 91 amps so 2/0 is plenty.


  • Environmental Rating - Type 1 (Indoor)
  • Schneider Electric Conext SW Pre-Wired 4048 120/240 vac Inverter for Off Grid
  • Schneider System Control panel
  • SW E-Panel
  • MidNite Back Plate (MNSW-BP)
  • AC Bypass Assembly
  • Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in.
  • Three MNSPD300ís (Surge Protection Devices)
  • 175 amp Battery Main Breaker for the SW Inverter
  • Warranty - 5 years
  • MidNite E-Panel, Classic Charge Contoller and SPDís made in the USA
  • Schneider SW Inverter made in India
  • Listed by ETL for US & Canada.
  • General labor for assembly, test and crating included

Truck Freight Only


  • Pre Wired Schneider Electric Conext SW4048 120/240 vac Inverter for Off grid.
  • 4,000 watt 48 volt inverter.
  • AC Bypass Assembly included
  • Classic 150 installed.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Manufacturers > Midnite Solar
Power Inverters > Schneider Electric
Manufacturers > Schneider Electric
Power Inverters > Pre-Wired Inverters > Off Grid
Power Inverters > Pre-Wired Inverters
Power Inverters