Request a Quote!


  Home > Solar Panel Mounts > Roof Mounts >

UniRac 209001C > SunFrame 1 Inch Cap Strip Screw, Clear > 1 Unit

UniRac 209001C - SunFrame 1" Cap Strip Screw, Clear - 1 Unit


 
Our Price: $0.47
Warranty: 10 Years
Compliance: Buy American

Availability: Limited inventory. Discontinued Item.
Call for availability.
Product Code: UNIRAC-209001C
Qty:

Description Datasheet
 

UniRac SunFrame 1" Cap strip screw - 1 Unit

Finish: Clear Anodized
Replaces: 321160
Manufacturer Part Number: 209001C

1/4" x 1" cap strip screws for use with SunFrame cap strips.

Cap strips are sized for specific PV modules. Shipped in 8- or 16-foot lenghs. Predrilled every 8 inches.

Cap strip screw (1/4-20 x 1, Type F thread cutting)—Use to secure each cap strip (and PV modules) to rail, one per predrilled hole. Use an additional end screw wherever a predrilled hole does not fall within 4 inches of the end of any cap strip segment.

Features

  • Superior Aesthetics:Visible components match clear or dark module frames.
  • Optimized module performace, system spacing allows convection cooling.
  • Ease of Installation: Minimized penetration with longer attachment spans than comparable products.
  • Complete technical Support: Installation and code compliance documentation

Sizing Chart

Unirac
Letter
Module
Thickness
Screw
Length
A 24 - 26 mm
0.94 - 1.02 in
Not Available
B 30 - 32 mm
1.18 - 1.26 in
Not Available
C 34 - 36 mm
1.34 - 1.42 in
3/4"
D 38 - 40 mm
1.50 - 1.57 in
3/4"
K 39 - 41 mm
1.54 - 1.61 in
Not Available
J 41 - 43 mm
1.61 - 1.69 in
3/4"
F 45 - 47 mm
1.77 - 1.85 in
1"
M 47 - 49 mm
1.85 - 1.93 in
Not Available
E 50 - 52 mm
1.97 - 2.05 in
1-1/4"
N 57 - 59 mm
2.24 - 2.32 in
Not Available
H & L Sanyo lipped modules Not Available
G Sharp lipped modules Not Available

Detailed Description

A Stunning Environmental Statement

Unirac’s SunFrame system leads the PV market with it's superior aesthetics. It's sleek design is engineered to sit low to the roof without gaps and implements shared rails for the best value.

Low and clean lines give SunFrame two advantages. The finished array stands off the roof just enough for cooling airflow to optimize module performance while all modules sit in low, gap-free rows without protrusions from the sides of the array.

Attachments and Flashing Systems:

  • Cap Strips
  • Splices
  • Standoffs & Flashings
  • L-Feet
  • L-Feet Adjusting Sliders
  • End Caps

Low and clean lines give SunFrame two advantages. The finished array stands off the roof just enough for cooling airflow to optimize module performance while all modules sit in low, gap-free rows without protrusions from the sides of the array.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Panel Mounts > Roof Mounts
Solar Panel Mounts > UniRac Solar Panel Mounts
Solar Panel Mounts
ARRA
Clear