Tamarack Solar > Top of Pole Mount for Six Solar Panels - 140 Inch Channel per column
Manufacturer Part Number:
TTP-A-6-70
Mount 6 modules with a total area of 149 square feet or less on a 6-inch Schedule-40 or schedule-80 pole
Pole Top for 6-inch Schedule 40 or 80 pipe for 4 modules up to 45-inch width Mount requires 2 pieces of 2-inch Sch 80 pipe. Buy locally.
Note:TTP-6-70 ships without 2-inch Schedule 40 pipe
Features
- 140-inch rails per column accommodate 6 modules with widths up to 46.16 inches
- No complex sizing documents or need to send module data sheets when ordering
- Heavy-Duty steel structure and Tamarack 3.1 aluminum module mounting rails
-
10° to 60° tilt angle
- UPS Shippable (mulitple boxes)
- Module clamps fit frames between 30-40mm
deep*
- Mounts on 6-IN Schedule-40 or Schedule-80
vertical steel post (user supplied)**
- Engineered for up to 160 mph wind speed and up to 200 psf snow load depending on horizontal pipe and vertical post size used. See the charts on our website*** to determine appropriate sizes based on your location.
TTP-A-6-70 ships without 2-inch Schedule-40 pipe
•
PIPE-KIT-SD10 includes four 2-inch Sch-40 5 foot pipes and 2 couplings.
Use with modules up 78-inches long. 75 lbs
• PIPE-KIT-SD12 includes four 2-inch Sch-40 6 foot pipes and 2 couplings.
Use with modules up 98-inches long. 102 lbs
Note: Pipe Kits above are shipped in 5-foot or 6-foot sections with couplings so they can shipped by UPS.
