Tamarack Solar > Top of Pole Mount for Six Solar Panels - 2 Vertical Poles
Manufacturer Part Number: UNI-PGRM/6P2
Pole Mount for 6 Solar Panels with 2 Vertical Poles
Pole Diameter: 4"
Supports: Six 60 Cell or 72 Cell Solar Panels
Not included with PRGM Mount: 4” schedule 40 steel pipes for vertical poles and a 3” schedule 40 steel pipe for the horizontal beam.
Calculation of the required horizontal beam length (L) in inches:
L = W x N + (N + 1) x 1.4 where N = number of modules and W = module width in inches
- The PGRM Series Pole Mount can be used to mount up to 6
solar modules with a frame thickness between 1.18” and 2”
- Install up to 92 square feet of modules on a single 4” Schedule 40 pole and up to 130 square feet of modules on two 4” schedule 40 poles
- Suitable for wind speeds up to 115 MPH
- For high wind locations add an additional vertical pole
- Tilt angle can be adjusted from 0° to 60° and is easily adjusted
- All sizes can ship by UPS Ground
- Simple one-person installation and adjustment