Request a Quote!

  Home >

SolarEdge P730 > 730W Commercial Power Optimizer w/ MC4 compatible connectors for two 72 cell solar panels

SolarEdge P730 > 730W Commercial Power Optimizer w/ MC4 compatible connectors for two 72 cell solar panels

This product has been discontinued, a possible alternative may be:

SolarEdge P860-2XLONG > 860W Commercial Power Optimizer for two 72 cell solar panels - MC4 compatible connectors

Stock Status:(Out of Stock)

Availability: This product is no longer available.
Product Code: SOLAREDGE-P730-5

Description Videos Datasheet

SolarEdge > 730W Commercial Power Optimizer

Series 5 - MC4 Compatible Input Connectors, MC4 Compatible Output Connectors, for two 72 cell solar panels wired in parallel (only one set of MC4 connectors), 1000 Max Vdc

Note: It is not allowed to mix S-series and P-series Power Optimizers in new installations.

One optimizer per 2 modules with SolarEdge StorEdge Inverter. Mitigates effects from manufacturing tolerance, partial shading & orientation. Flexible system design for maximum space utilization. Fast installation with single bolt.


Model P730-4NM4RX
Series Series 5
Manufacturer SolarEdge


Type Commercial Power Optimizer
(for 2 x 72 cell PV modules)
Operating Temperature Range -40° C to +85° C
Compatible SolarEdge Inverters Three phase inverters
Maximum Power per String 6000 W
Parallel Strings of Different Lengths or Orientations Yes
Enclosure IP68 / NEMA6P
Dimensions (W x H x D) 5" x 5.97" x 1.96"
Weight 2.34 lbs
Shipping Method Ground

Input (DC)

Rated Input Power 730 W
Absolute Maximum Input Voltage
(Voc at lowest temperature)
125 VDC
MPPT Operating Range 12.5 - 105 VDC
Maximum Short Circuit Current (Isc) 11 ADC
Maximum DC Input Current 13.75 ADC
Maximum Efficiency 99.5%
Weighted Efficiency 98.6%
Overvoltage Category II

Output (AC)

Maximum Output Current - During Operation 15 ADC
Maximum Output Voltage 85 VDC

Product Description

The SolarEdge power optimizer is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box. The SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually. Furthermore, the power optimizers monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal for enhanced, cost-effective module-level maintenance. Each power optimizer is equipped with the unique SafeDC™ feature which is designed to automatically shut down modules' DC voltage whenever the inverter or grid power is shut down (unless connected to a StorEdge Inverter that is in backup mode).

The MPPT per module allows for flexible installation design with multiple orientations, tilts and module types in the same string. When working with SolarEdge Inverters, SolarEdge power optimizers automatically maintain a fixed string voltage, allowing installers even greater flexibility with longer strings and strings of different lengths in order to design optimal PV systems. The SolarEdge power optimizers are compatible with c-Si and thin-film modules and have a 25 year warranty.


  • Specifically designed to work with SolarEdge inverters
  • Up to 25% more energy
  • Superior efficiency (99.5%)
  • Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer string lengths possible
  • Fast installation with a single bolt
  • Advanced maintenance with module-level monitoring
  • Module-level voltage shutdown for installer and firefighter safety
  • Use with two PV modules connected in series or in parallel

Share your knowledge of this product with other customers... Be the first to write a review