Magnum Energy AGS Controller - Network Version
Manufacturer Part Number: ME-AGS-N
The ME-AGS-N is the 'network' version of Magnum Energy's Automatic Generator Start (AGS) controllers. The version is setup and operated via a Magnum Energy Inverter and ME-RC or ME-ARC remote panel.
When using the ME-RC Remote, the ME-AGS-N has basic adjustments starting on battery voltage or temperature.
When using the ME-ARC remote, the ME-AGS-N has advanced start and stop settings based on: Time of day, battery State of Charge, battery voltage, high temperature, or inverter load amps. Also includes the ability to manually turn the generator ON and off, generator exercise, warm-up and cool-down.
- ME Series
- MM Series
- MMS Series
- MS Series
- MS-PAE Series
- RD Series
Two models are available:
The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC50 and ME-ARC50 remote panels and the ME-RTR router.
ME-AGS-N kit includes:
AGS module, 10’ network cable, and a 60’ remote temperature sensor cable.
ME-AGS-S kit includes:
AGS module, Remote on/off/test switch, switch bezel, a 25’ 6-wire cable, and has basic adjustments starting on battery voltage or temperature.
- All settings are adjustable from the ME-RC and ME-ARC remotes and the ME-RTR router.
- Auto start is locked out when utility power is present.
- Portable generator mode.
- The AGS accommodates 12, 24, and 48 volt settings.
Imagine being able to enjoy a day away all-the-while knowing your living space will stay cool and comfortable and your batteries will stay charged and ready for all of the activities that make up daily life. There’s nothing better than returning to a nice, cool, comfortable home with charged batteries after a day away. The Magnum Auto Gen Start (AGS) can make this happen.
The Magnum AGS is compatible with most major generators, including Onan, Powertech, Generac, Westerbeke, Kohler, EPS, Northern Lights, and most portable generators with electric start.
Automatically start your generator:
The ME-AGS-S is designed to automatically start your generator based on low battery condition or the inside room temperature.
Adjust the AGS to meet your needs:
With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC or the ME-RTR, the MEAGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.
Manual start and stop:
Auto Gen Start settings do not interfere with the manual start / stop operation of the generator. Just use any existing start / stop switch for your generator.