Kestrel 3000 Watt 48 Volt DC Wind Turbine
Application: Battery Charging / Grid Tie
Accessories Included: Interface Module
Manufacturer Part Number: e400i (Hybrid)
The e400i is the latest development in the Kestrel range. The completely new 120 pole single axial flux direct drive alternator incorporates three main shaft bearings for long service life. The e400i maintains rated output in excess wind speeds using Kestrel patented blade pitch control. The e400i therefore gives an optimum energy harvest with no cut out wind speed. This Kestrel, like the other models optimises low wind and stays in complete control whether loaded or unloaded during excessive wind speeds.
Features
- Charge batteries
- Power water pumps
- Use for resistance heating
- Telecommunication sites
- Power the national grid
- Wind solution for hybrid installations
Specifications
| Peak Output Power |
3200W |
| Power Output |
3000W |
| Rotational Speed |
520rpm |
| Cut in Wind Speed |
2.5m/s |
| Cut out Wind Speed |
N/A |
| Rotor Diameter |
4.0m |
| Swept Area |
12.5 sq m |
| Number of Blades |
3 |
| Blade Type |
Aerofoil |
| Lateral Thrust |
1500N |
| Passive Speed Control |
520rpm |
| Tower Top Mass |
230kg |
| Rated Sound Level |
<40dB at 100m
<45dB at 60m
|
| Protection |
IP55 |
| Generator Type |
PM 12ph |
| Output Voltage |
48, 110 and 200Vdc |
| Warranty |
2 years (extendable) |
| Routine Maintenance |
Periodic visual inspection |
