Discover Battery > LYNK Edge Card for SMA Sunny Island with LYNK Communications Gateway

Specifications

Detailed Information

Edge Cards (daughter boards) can be added to the LYNK© to enable communications to specific inverter brands. A selection of cards will become available to match popular inverter brands. Two Edge Cards can be used at one time for various inverters and charge controllers in one system. The SMA card is used to interface the AES battery bank with an SMA Sunny Island inverter system. The VICTRON card is used to interface the AES battery bank with Victron inverter and charger systems. The SLRK card is used to interface the AES battery bank with Sol-Ark inverter and charger systems. The 42-48-6650 and 44-24-2800 batteries will communicate directly to Xanbus devices from Schneider XW and SW inverters and charge controls. The 44-48-3000 needs the LYNK and Xanbus card to communicate with Schneider equipment.

Benefits & Features

• Real Time State of Charge
  AES Battery State of Charge (SoC) is displayed in real time by multiple brands of off-grid inverters. LED segments on LYNK device provide additional at a glance reference.
• Remotely Monitor State of Charge
  Remotely monitor the aggregate SoC for a string of AES batteries and data log sites using the data monitoring services offered by multiple brands of off-grid inverters
• Full Compatibility
  AES Battery charge settings are automatically sent and programed to multiple brands of off-grid inverter chargers and solar charge controllers.
• Faster Charging
  Up to 25% faster charging with dynamic SoC communication between AES Battery and power conversion system.*
• Mix and Match Systems
  Two slots for plug and play Edge Cards allows for two brands of power conversion electronics to be integrated with AES LiFePO4 Battery in the same power system.
• Maximize the Battery
  Internal cell balancing is optimized enabling the highest usable capacity and true 100% depth of discharge over the entire life of the battery.

Compatibility