Schneider Electric XW+ Power Distribution Panel (XW+ PDP) - without AC Breakers
Manufacturer Part Number: 865-1014-01
The XW Power Distribution Panel (XW+ PDP) with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems.
- Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers -
AC Breakers not included in this model.
Optional AC Breakers: Three AC Schneider Electric breakers 60 A 120/240 V AC, 2P
- Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
- Wiring is labeled and cut-to-length, ready to connect to inverter
- Uses flexible Arctic Ultraflex Blue wires
- Multiple knockouts on sides, top, bottom and back of unit
- Includes mounting back plate and and XW Conduit Box
- XW Series Inverter/Chargers
- XW Solar Charge Controllers
- C-Series Charge Controllers
- XW Connection Kit for second XW Hybrid Inverter/Charger (865-1020)
- XW Conduit Box (865-1025)
||1 DC breaker 250 A 160 V DC, 3/8” stud
1 ground terminal bus bar
1 neutral terminal bus bar
1 battery negative terminal bus bar
1 pair AWG 4 battery cables AWG
6 AC wiring Mounting plate
1 XW conduit box
Dimensions (H x W x D):
30" x 16" x 8.25" (761 x 406 x 210 mm)
Shipping Dimensions (H x W x D):
48" x 21" x 13.5" (1220 x 533 x 343 mm)
67.2 lbs (30.5 kg)
The SW Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support a code-compliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW+ System with up to three inverters, four charge controllers, or other equipment to support 120/1240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.
The XW+ Power Distribution Panel (XW+ PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW+ PDP.