 |
 |
 |
 |
Schneider Electric / HomeGrid Lithium Stack'd 14.4kWh Bundle > AC Coupling Kit with Single Phase Inverter 120/240 V - 14.4 kW backup, for PV array up to 8.5 kW
AC Coupling for Existing Grid-Tie Systems Needed Back-Up Power or TOU Off-Set / for PV array up to 8.5 kW / Can also be used for Back-Up Only System Battery Back-Up / Off-Grid Hybrid Inverter / Charger - UL 1741 SA, Rule 21, HECO Rule 14H, and PREPA
The Conext XW Pro 6848 is the ideal solution for solar and storage with grid tied, backup power and off grid capability.
- Rule 21, HECO Rule 14H, and PREPA compliant
- Integrates with Conext™ Gateway and Conext™ Insight 2 for simplified system configuration and powerful remote monitoring & control
- Interoperates with solar charge controllers and PV inverters for both DC coupled and AC coupled configurations
All Hybrid Inverter PV Systems will need rapid shutdown. The IMO BG10P34-11 remote shutdown button is an outdoor initiation switch that can be used to trigger PV system rapid shutdown.
IMO RSD Button BG10P34-11 > Rapid Shutdown Button compatible with APsmart Rapid Shutdown System
IEEE 1547-2018 requires the local communications interface to remain available whenever the DER is operating. This indirectly creates a requirement for the IQ Gateway not to reboot during and following a low voltage ride through event. The IQ Gateway hardware was redesigned to meet this requirement so installers must only choose from the list of supported hardware and be running software versions 7.3.460 or later to be fully compliant.
|
Specifications
Model
|
Conext XW Pro 6848
|
Series
|
Conext XW Pro
|
Manufacturer
|
Schneider Electric
|
Part Number
|
865-6848-21 (RNW865684821)
|
Mechanical
Type
|
120/240 VAC Hybrid Inverter/Charger
|
Operating Temperature Range
|
-25°C to 70°C (-13°F to 158°F)
(power derated above 25°C (77°F)
|
Enclosure
|
NEMA Type 1 Indoor
|
Dimensions (W x H x D)
|
23" x 16" x 9"
|
Weight
|
121.7 lbs
|
Shipping Method
|
169 lbs
|
Inverter AC output
Output power (continuous) at 25°C
|
6800 W
|
Overload 30 min / 60 sec at 25°C
|
8500 W / 12000 W
|
Output power (continuous) at 40°C
|
6000 W
|
Maximum output current 60 seconds (rms)
|
102 A (120 V); 52 A (240 V)
|
Output frequency (selectable)
|
50 / 60 Hz
|
Output voltage
|
L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
|
Total harmonic distortion (THD) at rated power
|
< 5%
|
Idle consumption search mode
|
< 8 W
|
Input DC voltage range
|
42 to 60 V (48 V Nominal)
|
Maximum input DC current
|
180 A
|
Charger DC Output
Maximum output charge current
|
140 A
|
Output voltage range
|
40 - 64 V (48 V Nominal)
|
Charge control
|
Three stage, two stage, boost, custom
|
Charge temperature compensation
|
Battery temperature sensor included
|
Power factor corrected charging
|
0.98
|
Compatible battery types
|
Flooded (default), Gel, AGM, LiON, custom*
|
Batter bank range (scaled to PV array size)
|
440 - 10000 Ah
|
AC Input
AC 1 (grid) input current (selectable limit)
|
3 - 60 A (60 A default)
|
AC 2 (generator) input current (selectable limit)
|
3 - 60 A (60 A default)
|
Automatic transfer relay rating / typical transfer time
|
60 A / 8 ms
|
AC input voltage limits (bypass/charge mode)
|
L-N: 78 - 140 V (120 V nominal)
L-L: 160 - 270 V (240 V nominal)
|
AC input frequency range (bypass/charge mode)
|
55 - 65 Hz (default); 52 - 68 Hz (allowable)
|
AC Grid-Tie Output
Grid sell current range on AC1(selectable limit)
|
0 to 48 A (120 V) / 0 to 27 A (240 V)
|
Grid sell voltage range on AC1
(auto adjusts entering sell mode)
|
L-N:105.5 to 132 +/- 1.5 V
L-L: 211 to 264 +/- 3.0 V
|
Grid sell frequency range on AC1
(auto adjust entering sell mode)
|
59.4 to 60.4 +/- 0.05 Hz
|
Features:
Higher return on investment
-
Rule 21, HECO Rule 14H, and PREPA compliant
Designed for reliability
- Extensive quality and reliability testing
- Highly Accelerated Life Testing (HALT)
- Globally proven and recognized field performance
Flexible
- 120/240 V split phase systems, scalable up to 4 inverters (34 kW)
- Supports DC coupled and AC coupled off-grid and grid-tie architectures
- Supports charging of Lithium Ion battery packs
Easy to service
- Monitor, troubleshoot or upgrade firmware with the ConextTM Gateway and the ConextTM Insight 2
- Global support and training
- Field serviceable with replacement boards and spare parts
Easy to install
- Configures quickly using ConextTM Gateway and the ConextTM Insight 2
- System configures quickly into compact wall-mounted system
- Integrates both grid and generator power with dual AC inputs
- Available in pre-wired system with low voltage and high voltage MPPT battery charging systems
HomeGrid > 14.4 kWh Lithium Iron Stack'd Battery Storage
The HomeGrid Stack'd Series offers an ease-of-install, aesthetics, and performance that is unmatched in residential batteries. Each Stack is especially suitable for applications of high power, limited installation space, and restricted load-bearing and long cycle life.
The Stack’d Series has a built-in BMS battery management system, which can manage and monitor cell’s information including voltage, current and temperature. What’s more, the BMS can help extend the cycle life by balancing cells during charging and discharging.
Multiple battery stacks are allowed to be connected in parallel to expand capacity and power to meet the requirements of longer power supporting duration and higher power consumption.
Model
|
Stack'd 14.4kWh (stack of 3 battery modules)
|
Series
|
Stack'd
|
Manufacturer
|
HomeGrid Energy
|
Mechanical
Type
|
Lithium Iron Phosphate (LiFePO4)
|
Dimensions (W x D x H)
|
29" W x 15.75" D x 30.5" H
|
Weight
|
412 lbs
|
Total Battery Energy
|
14.4 kWh
|
Continuous Battery Power Output
|
9 kW
|
Continuous Inverter Power Output
|
9 kW
|
Peak Inverter Power Output
|
16 kW
|
Max PV Input Power
|
13 kW
|
Battery Capacity
|
500 Ah
|
Nominal Voltage
|
48 V
|
Enclosure Rating
|
IP55
|
Lifecycles Tested
|
8000
|
Mounting Options
|
Floor Standing
|
Certificates
|
UL 1642, UL 1973, UN 38.3, UL 9540
|
Warranty
|
10 years, 4000 Cycles
|
Scalability
|
10 Units in parallel (144 kWh)
|
Shipping Method
|
Freight
|
Features
Lithium iron phosphate battery
The lithium iron phosphate battery (LiFePO4 or LFP) is the safest of the mainstream lithium battery types. A single LFP cell has a nominal voltage of 3.2V. A 51.2V LFP battery consists of 16 cells connected in series.
LFP is the chemistry of choice for very demanding applications. Some of its features are:
- Rugged - It can operate in deficit mode during long periods of time.
- High round trip efficiency.
- High energy density - More capacity with less weight and volume.
- High charge and discharge currents - Fast charges and discharges are possible.
- Flexible charge voltages.
Stack’d Series Features
- The whole stack and each module is non-toxic, pollution-free, and environment-friendly.
- Cathode material is made from LiFePO4 with safety performance and long cycle life.
- Battery management system (BMS) has protection functions including over-discharge, over-charge, and over-current and high/low temperature.
- The system can automatically manage charge and discharge state and balance current and voltage of each cell.
- Flexible configuration, multiple battery modules can be stacked for expanding output and Capacity.
- Adopted self-cooling mode efficiently reduces any system noise.
- The module has less self-discharge, up to 6 months without charging on a shelf, no memory effect, with excellent performance of shallow charge and discharge.
- Working temperature range is from -10 to 55℃ (14F-131F) , (Charging 0~45℃ (32-113F); discharging -10~55℃ (14F-131F) )with excellent discharge performance and cycle life.
- Small volume, light weight, plug-in embedded design modules, are easy to install and maintain.
Schneider Electric Conext XW Pro 6848 RNW865684821 - Documentation
HomeGrid > 14.4 kWh Lithium Iron Stack'd Battery Storage - Documentation
|
|
 |
 |
 |
 |
|
 |


|