Request a Quote!

  Home > Power Inverters > OutBack Power Inverters > Outback Power FXR/VFXR Inverters >

OutBack Power VFX2812M > 2800 Watt 12 Volt Vented Mobile Inverter - Mobile / Marine

OutBack 2800 Watt 12 Volt Vented Mobile Inverter - VFX2812M

Our Price: $2,385.00
Warranty: Standard 2 year / Optional 5 year

Product Code: OUTBACK-VFX2812M

Description Datasheet

OutBack Power Vented Off-Grid Inverter - 2800 Watts 12 Volts - Mobile / Marine

2800 Watt 12 Volt 120 VAC/60 Hz
Manufacturer Part Number: VFX2812M

True sine wave output, Intelligent battery charging, High operating efficiency, Corrosion-resistant internal components, Integrated network communications, Ideal for mobile/marine applications

OutBack VFX2812M is a 80 Amp Charger, Mobile Vented Turbo M-Series Sealed inverter for Marine-Mobile Applications.The Outback M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sine wave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching. All M-series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs.


  • Powder-coated all aluminum die-cast chassis
  • Internal electronic components are cooled by heat transfer
  • Gaskets on all openings to provide water resistance
  • Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
  • Conformal coated circuit boards to resist corrosion
  • Designed to allow easy field servicing and repair


Vented Models (VFX)
2812M 3524M 3232M
Nominal DC Input Voltage 12 VDC 24 VDC 32 VDC
Continuous Power Rating at 25° C 2800 VA 3500 VA 3200 VA
AC Voltage/Frequency 120 VAC 60 Hz
Continuous AC RMS Output at 25° C 23.3 amps AC 29.2 amps AC 26.6 amps AC
Full Idle Power ˜ 20 Watts ˜ 20 Watts ˜ 21 Watts
Search ˜ 6 Watts
Typical Efficiency 90% 92% 92%
Typical Total Harmonic Distortion 2%
Maximum 5%
Output Voltage Regulation +/- 2%
Peak Maximum Output Current 56 amps AC 70 amps AC 56 amps AC
RMS 40 amps AC 50 amps AC 40 amps AC
Surge AC Overload Capability 4800 VA 6000 VA 4800 VA
5 Second 4000 VA 5000 VA 4000 VA
30 Minutes 3200 VA 4000 VA 4000 VA
AC Input Current Maximum 30 amps AC
AC Input Voltage Range (MATE Adjustable) 80 to 150 VAC
AC Input Frequency Range 54.0 to 66.0 Hz
DC Input Range 10.5 to 17.0 VDC 21.0 to 34.0 VDC 28.0 to 45.3 VDC
Continuous Battery Charge Output 125 amps DC 85 amps DC 45 amps DC
Warranty Standard 2 year / Optional 5 year
Unit Weight 54 lbs (25 kg)
Shipping 62.2 lbs (28 kg)
Shipping 62.2 lbs (28 kg)
Unit Dimensions (H x W x L) 12 x 8.25 x 16.25" (30 x 21 x 41 cm)
Shipping 21.75 x 13 x 22" (55 x 33 x 56 cm)

Detailed Description:

Industry leading surge power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to charge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord.

Outback's modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE2M controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in field are easy thanks to a simple three circuit board design.The Outback M-Series inverter is the superior choice when you need a reliable, powerful and modular true sine wave inverter/charger.The sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.The turbo model has a modified DC Cover with a ventilation fan built in for better performance.

Welcome to the OutBack Power Systems FX Series Inverter/Charger System

The FX Series Inverter/Charger offers a complete power conversion system—DC to AC, battery charging, and an AC transfer switch—and can be used as a stand-alone or back-up application. It is designed for indoor or enclosed locations.

OutBack Power Systems does everything possible to assure the components you purchase will function properly and safely when installed as instructed according to local and national electrical codes (NEC). Please read all of the following instructions and the instructions that come with any other OutBack components that make up your power system.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Power Inverters > OutBack Power Inverters > Outback Power FXR/VFXR Inverters
Power Inverters
Power Inverters > OutBack Power Inverters
Power Inverters > Off Grid Inverters