Iota Smart Controller for Lithium-Iron Batteries with BMS
Manufacturer Part Number: IQ4-LIFEPRO
For Lithium-Iron Batteries with BMS
The IQ-LIFEPO is tailored for use with today’s state-of-the-art LiFePO4 batteries that use a Battery Management System. The IQ-LIFEPO allows the DLS to deliver proper voltage to charge the larger 4-cell design of the battery and remains in a stand-by trickle mode ready to deliver a fresh BULK charge when needed.
The IQ-LIFEPO progresses through the following stages while charging your batteries:
The Bulk State charges the battery at an optimal controlled output, reducing the time it takes to charge the battery.
Once the battery has been fully charged, the charger remains in the Float State, monitoring the battery for drop in voltage.
If the battery has remained in the Float State for 15 days, the IQ automatically reinitiates a bulk charge to ensure the battery remains in a completely charged condition.
The IQ Smart Charge Controller easily plugs into the Dual Voltage Jack* of your IOTA DLS Battery Charger. Once plugged in, the IQ Smart Charge circuitry is automatically engaged and your IQ module will activate. Your DLS will now provide an automatic and trouble free charging profile to your batteries!
*Location of the Dual Voltage Jack may vary depending on the IOTA DLS Model
Note: External IOTA IQ Smart Charge Controllers are not compatible with DLS with internal IQ charge control.