IntegraRack > IR AnchorSpike Mounting Kit (10 Pack) For BallastRack Frames

Each IR AnchorSpike™ Kit is good for up to 5 BallastRack frames, includes 10 of our specially designed barbed, hollow spikes and a strong two part epoxy kit. The Base Tube of each frame is designed to clamp around each spike for unbelievable strength.

IR AnchorSpike Kit provides enough materials to install up to 10 solar modules with this mounting option, and comes with our specially designed 30 inch barbed aluminum spikes and a super strong two part epoxy. The IR AnchorSpikes have a hollow structure with open barbs that allow the epoxy to flow deep into the soil and create a solid anchor rated for over 1,000 pounds of uplift per spike. Once in place, each IR-45ASA frame is designed to clamp onto two AnchorSpikes when the carriage bolts at the ends are tightened, which allows for fast and easy leveling of the system.

*IR AnchorSpike must be tested in soil at installation site to ensure it can withstand a minimum of 1,000 pounds of uplift.
*Professional installation recommended

Recommended Tools:

• SDS Hammer Drill
• 3/4 In. x 30 In. SDS-Max Speed-X Carbide Rotary Hammer Bit for Concrete Drilling

Items Included with IR AnchorSpike Mounting Kit

• ( 10 ) IR AnchorSpikes
• ( 1 ) Bottle of Epoxy A
• ( 1 ) Bottle of Epoxy B
• ( 1 ) Mixing Cup
• ( 1 ) Stirring Stick
• ( 2 ) Measuring Cups
• ( 1 ) Funnel
• ( 1 ) Pair of Gloves
• ( 1 ) 13mm Ratchet Wrench for BallastRack Frame Assembly