OutBack Sealed Off-Grid Inverter, 2000 Watts 12 Volts
230 VAC/50 Hz International Model
Manufacturer Part Number: FX2012ET
This 230 VAC inverter is for export, primarily to European countries.
The OutBack FX Inverter is a modular "building block" sine wave inverter/charger which can be used for both small and large power systems. Each OutBack FX inverter/charger module is a complete power conversion system - DC-to-AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be connected at any time in either parallel (230 VAC), or even three-phase (230/400 VAC) configurations. This allows the system to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future. Up to eight FX inverter/chargers can be connected together to provide up to 20 kW of continuous power conversion capacity. The OutBack FX inverter/charger system is designed for both residential and commercial stand-alone and utility-interactive applications with battery energy storage.
Features
- Powder-coated all aluminum die-cast chassis
- Internal electronic components are cooled by heat transfer
- Gaskets on all openings to provide water resistance
- Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
- Conformal coated circuit boards to resist corrosion
- Designed to allow easy field servicing and repair
Applications
- Hot and humid climates where a protected area is not available for installation of the inverter/charger system
- Salt air environments such as Hawaii where you can't get away from the salt air and where there is little difference between indoors and outdoors
- Dirty environments where dust or drifting organic matter such as cottonwood could clog air openings in an unattended system
- Boats and RV's where water might splash on the inverter
- Greater control of unwanted radio frequency interference
Specifications
|
Sealed Models |
|
FX2012ET |
FX2024ET |
FX2348ET |
Nominal DC Input Voltage |
12 VDC |
24 VDC |
48 VDC |
Continuous
Power Rating
at 25° C |
2000 VA |
2000 VA |
2300 VA |
AC Voltage and Frequency |
230 VAC
50 Hz |
230 VAC
50 Hz |
230 VAC
50 Hz |
Continuous
AC RMS Output
at 25° C |
8.7 amps AC |
8.7 amps AC |
10.0 amps AC |
Full Idle Power |
˜ 20 Watts |
˜ 20 Watts |
˜ 23 Watts |
Search |
6 Watts |
Typical
Efficiency |
90% |
92% |
93% |
Typical Total Harmonic
Distortion |
2% |
2% |
2% |
Maximum |
5% |
5% |
5% |
Output
Voltage
Regulation |
+/- 2% |
+/- 2% |
+/- 2% |
Peak
Maximum
Output Current |
28 amps AC |
35 amps AC |
35 amps AC |
RMS |
20 amps AC |
25 amps AC |
25 amps AC |
Surge AC
Overload
Capability |
4600 VA |
5750 VA |
5750 VA |
5 Second |
4000 VA |
4800 VA |
4800 VA |
30 Minutes |
2500 VA |
3100 VA |
3100 VA |
AC Input
Current
Maximum |
30 amps AC |
30 amps AC |
30 amps AC |
AC Input
Voltage Range
(MATE Adjustable) |
160 - 300 VAC |
AC Input
Frequency Range |
44 - 56 Hz |
DC Input
Voltage Range |
10.5 - 17.0
VDC |
21.0 - 34.0
VDC |
42.0 - 68.0
VDC |
Continuous
Battery Charge Output |
100 amps DC |
55 amps DC |
35 amps DC |
Warranty |
Standard 2 year / Optional 5 year |
Unit Weight |
56 lbs (25 kg) |
Dimensions
(H x W x L) |
13 x 8.25 x 16.25" (33 x 21 x 41 cm) |