SHURflo 24 Volt DC Pump Controller (LCB-O)
9300 Series
Manufacturer Part Number: 902-100
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
Features
- Operates on 24 VDC
- Increases daily water output up to 30%
- System starts pumping earlier in the morning
- System stops pumping later in the evening
- Protects pump from low or high voltage conditions
- Terminals for float switch
Specifications
Max. Array Input Voltage (24V) | 45V |
Max. Array Input Voltage (12V) | N/A |
Min. Startup Voltage (24V) | 25V |
Min. Startup Voltage (12V) | N/A |
Shutdown Voltage | 28V |
Max. Output Current | 5 Amps |
Maximum Power Output | 150 Watts |
Over Temperature Shutdown | 176°F (80°C) |
Ambient Temperature | 14°F (-10°C) to 113°F (45°C) |