Kestrel 3500 Watt 110 Volt DC Wind Turbine
Model |
e400n (110V) |
Series |
e400n |
Manufacturer |
Kestrel |
Applications |
Battery Charging / Off-grid |
Accessories Included |
Voltage Limiter |
Peak Output Power |
3500W |
Power Output |
3000W |
Rated Wind Speed |
12.0 m/s |
Cut in Wind Speed |
4.5 m/s |
Rotor Diameter |
13.1 ft (4 m) |
Number of Blades |
3 |
Blade Type |
Fiberglass |
Tower Top Mass |
507 lb (230 kg) |
Protection |
IP55 |
Output Voltage |
110 VDC |
Warranty |
2 years (extendable) |
Detailed Description
The e400n is the latest development in the Kestrel range. The completely new 120 pole single axial flux direct drive alternator incorporates three main shaft bearings for long service life. The e400n maintains rated output in excess wind speeds using Kestrel patented blade pitch control. The e400n therefore gives an optimum energy harvest with no cut out wind speed. This Kestrel, like the other models optimizes low wind and stays in complete control whether loaded or unloaded during excessive wind speeds.
Features
- Off-grid electricity supply
- Charging batteries
- Power water pumps
- Supply the national grid
- Boost hybrid systems for increased energy efficiency