Request a Quote!


  Home >

Enphase M215-60-2LL-S22-IG Micro Inverter > 215 Watt MC4 4MM > ARRA

Enphase M215-60-2LL-S22 - 215 Watt 208 / 240 VAC Micro Inverter - MC4 Connectors-IG


 
This product is discontinued & to be replaced by:
Enphase IQ6PLUS-72-2-US > IQ 6+ 400 Watt MC4 Micro Inverter - IQ System
Warranty: 25 Years
Compliance: Buy American


Availability: Usually Ships in 24 to 48 Hours
Product Code: ENPHASE-M215-60-2LL-S22-IG
 

Description Datasheet
 

Enphase 215 Watt 208/240 VAC IG Micro Inverter

(IG) Integrated Ground

This Item is Replaces: ENPHASE-M215-60-2LL-S22

Model M215-60-2LL-S22-IG
Series M215
Manufacturer Enphase Energy

Mechanical

Type Grid Tie - Micro Inverter
Ambient Temperature Range -40°C to +65°C
Operating Temperature Range -40°C to +85°C
Enclosure Outdoor - NEMA 6
Cooling Natural Convection - No fans
Connectors MC4
Dimensions (W x H x D) 6.8" x 6.45" x 1.0"
Weight 3.5 lbs
Shipping Method Ground

Input (DC)

Recommended PV Power (STC) 190 W - 260 W
Max Voltage 45 V
Nominal Voltage
Peak Power Tracking Voltage 22 V - 36 V
Operating Range 16 V - 36 V
Min/Max Start Voltage 22 V / 45 V
Max Current 10.5 A

Output (AC)

Maximum Output Power 215 W
Nominal Voltage 208 V / 240 V
Voltage Range 183 V - 229 V / 211 V - 264 V
Frequency 60 Hz (North America)
Max Current

Features

  • Maximum energy production
  • Resilient to dust, debris and shading
  • Performance monitoring per module
  • System availability greater than 99.8%
  • No single point of system failure
  • Quick and simple design, installation and management
  • 24/7 monitoring and analysis
  • Low voltage DC
  • Reduced fire risk
  • (IG) Integrated Ground

Detailed Description

The Enphase® M215-IG Microinverter (M215-60-2LL-S22-IG) with integrated ground delivers increased energy harvest and reduces design and installation complexity with its all-AC approach. With the advanced M215, the DC circuit is isolated and insulated from ground, so no Ground Electrode Conductor (GEC) is required for the microinverter. This further simplifies installation, enhances safety, and saves on labor and materials costs.

The Enphase M215 integrates seamlessly with the Engage® Cable, the Envoy® Communications GatewayTM, and Enlighten®, Enphase’s monitoring and analysis software.

The M215 is the latest in Enphase's line of micro inverters. Smaller and more efficient than its predecessors, the M215 reduces overall cost by shifting some of its burden towards the specially designed "Engage" cabling system. This product works with 60-cell solar modules only.

Frequently Asked Questions
  • How many drops of Engage cable do I need?

    Each drop has a special M215 connector right in the middle, so you will need one drop for each M215 in your array. Be sure to add an extra drop for each row after the first to allow the cable reach up to the next row. Also note that you can have a maximum of 17 240VAC or 25 208VAC M215s on one string. If you need any help sizing your Enphase solar system, please give us a call at 888-899-3509 ext. 1.

  • How are the Engage cable drops cut?

    Drops are cut at the halfway point between two connectors, allowing about 20" of cable between the last connector and the end of the cable for portrait layout and 33.5" for landscape layout.

  • Do I need 208 or 240 VAC Engage cable?

    208 VAC is usually for commercial projects, while 240 VAC is for residential.

  • Which M215 do I need?

    The difference between the two M215s EcoDirect offers is in their connectors, so your choice depends on whether your panels have an MC4, Tyco, or SMK connector. We also offer an Ontario FIT M215 for those in Ontario, Canada.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful
 
5 of 5 Enphase m215 October 16, 2014
Reviewer: william mijangos from panama city, FL United States  
the Enphase works great so far, i am happy with it.


Was this review helpful to you?