Request a Quote!


  Home >

UniRac 202003C > SunFrame 192 Inch Cap strip Size E, Clear

UniRac 202003C - SunFrame 192" Cap strip Size E, Clear Anodized


 
Warranty: 10 Years
Compliance: Buy American

Stock Status:(Out of Stock)

Availability: This product is not longer available.
Product Code: UNIRAC-202003C
 

Description Datasheet
 

UniRac SunFrame 192" Capstrip > 1 Unit

Size: E
Finish: Clear Anodized
Manufacturer Part Number: 202003C

Capstrip fits modules size E (50 - 52 mm / 1.97 - 2.05 in. thick). For use with Unirac SunFrame. Requires 1-1/4" cap strip screw.

Features

  • Superior Aesthetics:Visible components match clear or dark module frames.
  • Optimized module performace, system spacing allows convection cooling.
  • Ease of Installation: Minimized penetration with longer attachment spans than comparable products.
  • Complete technical Support: Installation and code compliance documentation

Specifications

Unirac
Letter
Module
Thickness
Screw
Length
A24 - 26 mm
0.94 - 1.02 in
Not Available
B30 - 32 mm
1.18 - 1.26 in
Not Available
C 34 - 36 mm
1.34 - 1.42 in
3/4"
D 38 - 40 mm
1.50 - 1.57 in
3/4"
K 39 - 41 mm
1.54 - 1.61 in
Not Available
J 41 - 43 mm
1.61 - 1.69 in
3/4"
F 45 - 47 mm
1.77 - 1.85 in
1"
M 47 - 49 mm
1.85 - 1.93 in
Not Available
E 50 - 52 mm
1.97 - 2.05 in
1-1/4"
N 57 - 59 mm
2.24 - 2.32 in
Not Available
H & LSanyo lipped modulesNot Available
G Sharp lipped modulesNot Available

Detailed Description

A Stunning Environmental Statement

Unirac’s SunFrame system leads the PV market with it's superior aesthetics. It's sleek design is engineered to sit low to the roof without gaps and implements shared rails for the best value.

Low and clean lines give SunFrame two advantages. The finished array stands off the roof just enough for cooling airflow to optimize module performance while all modules sit in low, gap-free rows without protrusions from the sides of the array.

Attachments and Flashing Systems:

  • Cap Strips
  • Splices
  • Standoffs & Flashings
  • L-Feet
  • L-Feet Adjusting Sliders
  • End Caps

Low and clean lines give SunFrame two advantages. The finished array stands off the roof just enough for cooling airflow to optimize module performance while all modules sit in low, gap-free rows without protrusions from the sides of the array.


Share your knowledge of this product with other customers... Be the first to write a review