Request a Quote!

  Home >

SolarEdge SE3000A-US-U > 3.0kW 240 VAC Single Phase Grid-Tie Inverter
SolarEdge SE3000A-US-U > 3.0 kW 240 VAC Single Phase Grid-Tie Inverter

This product has been discontinued & is replaced by:
SolarEdge HD-Wave SE3000H-US > 3.0kW 240 Volt AC Single Phase Grid-Tie Inverter

Stock Status:(Out of Stock)
Product Code: SOLAREDGE-SE3000A-US-U

Description Videos Datasheet

SolarEdge > 3000 Watt 240 Volt AC 1- Phase Grid-Tie Inverter

3000W, 240VAC, 60Hz, DC Disconnect, 2 Unfused Input, No MPPT, Ungrounded, RS485 and Ethernet, Arc-Fault Protection, Built-In Rapid Shutdown

Single Phase Solar Inverters - Now with Built-In Rapid Shutdown - The Best Choice for SolarEdge Enabled Systems

SolarEdge -U version ships with the AC/DC disconnect integrated. The non-U version ships with disconnect that is installed separately.


Model SE3000A-US-U
Series Single Phase Inverters
Manufacturer SolarEdge


Type Grid-Tie
Operating Temperature Range -25° C - 60° C
Enclosure NEMA 3R
Cooling Natural Convection
Dimensions (W x H x D) 30.5" x 12.5" x 7.2"
Weight 51.2 lbs
Shipping Method Ground

Input (DC)

Maximum DC Power (STC) 4050 W
Max Voltage 500 V
Peak Power Tracking Voltage N/A
Min Start Voltage N/A
Max Input Current 9.5 ADC

Output (AC)

Nominal Output Power 3,000 W
Voltage Range 211 - 240 - 264 VAC
Frequency 60.0 Hz
Max Current 12.5 A


Data Sheet SolarEdge SE3000A-US thru SE11400A-US
Warranty SolarEdge

Detailed Description

The SolarEdge DC-AC PV inverter is specifically designed to work with the SolarEdge power optimizers. Because MPPT and voltage management are handled separately for each module by the power optimizer, the inverter is only responsible for DC to AC inversion. Consequently, it is a less complicated, more cost effective, more reliable solar inverter with a standard 12 year warranty, extendable to 20 or 25 years.

A proprietary data monitoring receiver has been integrated into the single phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring portal for performance analysis, fault detection and troubleshooting of PV systems. The SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. The fixed string voltage ensures operation at the highest efficiency at all times (98% weighted efficiency) independent of string length and temperature.

The single phase inverter comes with a built-in DC switch, is lightweight and can be installed by a single person on a supplied bracket.

  • Built-In Rapid Shutdown functionality for NEC 2014 690.12
  • Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance (part numbers ending in “-U”)
  • Superior efficiency (>97%)
  • Small, lightweight and easy to install on provided bracket
  • Built-in module-level monitoring receiver
  • Internet connection through Ethernet or Wireless via ZigBee
  • Outdoor and indoor installation - IP65/NEMA 3R
  • Fixed voltage inverter, DC/AC conversion only
  • Pre-assembled AC/DC Safety Switch for faster installation
  • Optional – Built-in Revenue Grade Meter, ANSI C12.1

Share your knowledge of this product with other customers... Be the first to write a review