SolarEdge HD-Wave > SolarEdge EV Charger Holder and Cable
40 amp Level 2, J1772 Connector with a 25 foot cable and holder.
Please note: The SolarEdge SE-EV-KIT-25J40-1 EV Charger Holder and Cable is an add-on product for the
SolarEdge HD-Wave SE7600H-US000NNV2 7.6kW Grid-Tie Inverter for Electric Vehicle Charging
Now available for the first time, a SolarEdge HD-Wave inverter with an integrated Level 2 EV charger add-on (SE7600H-US000NNV2). This HD-Wave inverter allows users to charge electric vehicles up to six times faster than a standard Level 1 charger through an innovative solar boost mode that utilizes grid and PV charging simultaneously. This product is the first PV inverter-integrated EV charger.
By installing the SolarEdge HD-Wave inverter-integrated EV charger (SE7600H-US000NNV2), the homeowner is benefited from the reduced hassle of installing a separate standalone EV charger and a PV inverter. Furthermore, the installer is benefited by eliminating the need for additional wiring, conduit, and a breaker installation. By installing an EV charger that is integrated with an inverter, an additional dedicated circuit breaker is not needed, saving space and eliminating a potential main distribution panel upgrade.
SolarEdge HD-Wave 7.6kW 240 Volt Inverter for EV Car Charging - Features
- Combines sun and grid power for charging up to six times faster than existing electrical infrastructure
- Reduces workload and costs of installing a standalone EV charger and a PV inverter
- Saves space on main distribution panel to avoid potential upgrade
- Cover by a 12-year warranty, extendable to 20 or 25 years
- Fully integrated with SolarEdge monitoring platform
- Built-in meter enables separate tracking of EV power usage for visibility and control
- Demand-Response ready
The SolarEdge HD-Wave PV inverter (SE7600H-US000NNV2) combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability.
A proprietary data monitoring receiver has been integrated into the single phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring platform for performance analysis, fault detection and troubleshooting of PV systems.
The single phase inverter comes with a built-in DC safety switch, integrated rapid shutdown and a standard 12-year warranty.