Request a Quote!

  Home > Solar Panel Mounts > S-5! >

S-5! > PV Kit (UL) Bonding & Mounting Universal Mid Clamp > for 1.3" to 2.5"

S-5! > PV Kit (UL) Bonding & Mounting Universal Mid Clamp > for 1.3" to 2.5"

Alternative Views:

Our Price: $7.59
Warranty: 25 Years

Product Code: S-5-PV-KIT-UL

Description Datasheet

S-5! > PV Kit (UL) Bonding & Mounting Universal Mid Clamp > for 1.3" to 2.5"

NOTE: S-5! Mini Clamps, S-5! CorruBrackets and S-5! VersaBrackets sold separately, not included with kit.

Manufacturer Part Number: S-5-PV Kit (UL)

S-5!, PV Kit, bonding and mounting universal mid clamp, for 1.3" to 2.5" (33-64mm) frame, with 8mm stud, pv grab, hex nut & Stainless Steel mounting disc with attached cable management clips, UL 2703, S-5-PV Kit (UL)

The new S-5-PV Kit is one of the first solar module mounting solutions in the industry to be listed to the new UL subject 2703, a standard that covers both bonding and mounting. In order to meet the UL requirements, the S-5-PV Kit had to be submitted for tests, being evaluated under the severest of conditions to confirm that the product will withstand the elements while maintaining electrical conductivity.

Furthermore, the S-5-PV Kit has gained an ETL Listing to UL 1703. UL and ETL listings are widely recognized by most Authorities Having Jurisdiction, which means fewer inspection hassles for installers.


  • New longer PV stud now accommodates PV frame thicknesses from 1.3" (33 mm) to 2.5" (64 mm)!
  • Embossed mounting disk placement guides designed to provide quick and precise alignment!
  • Four new strategically placed mounting disk hooks to assist in wire management!
  • New broader ears on the PV grab allow for even easier installation and precise module engagement!
  • Mounting disk is universally directional for simplicity of installation!
  • Absolutely NO rails required!
  • Incredible holding strength that only S-5! can offer!

Detailed Description

Previously, electrical continuity between modules (called “bonding” within the industry) required the mounting of an electrical lug to each PV module, and interconnection of the lugs with a copper wire. However, the S-5-PV Kit's groundbreaking NEW stainless steel mounting disk has twelve nodes designed to ensure the module-to-module conductivity of anodized aluminum module frames.

With the new S-5-PV Kit, the module is simply anchored with the kit, and is automatically bonded. No lugs or wire required except to connect one string of modules to another and to ground the system. This connection detail represents installed electrical cost savings of $6-$12 per unit.

In most cases, the savings in time and materials is sufficient to pay for the entire S-5-PV Kit and clamp setup! The S-5-PV Kit continues to be the easiest, most cost-effective way to install solar panels directly to standing seam metal roofs, remaining the most popular choice worldwide.

Mounting hardware as low as $0.07 per watt; Aluminum Disk mounting hardware as low as $0.06 per watt!

The S-5-PV Kit mounts to any of S-5! Mini clamps. The patented attachment clamp and round-point setscrews enable the entire installation without a single penetration through the standing seam metal roof’s surface. With the S-5-PV Kit and our Mini clamps, mounting a leak-free solar assembly is a quick and easy process.

(Our S-5! Mini clamps are a handy way to install everything from the PV frames to the electrical chases. The PV Kit and Mini Clamps are each sold separately.)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Panel Mounts > S-5!
Solar Panel Mounts
Solar Panel Mounts > Roof Mounts