MODEL |
PVI-3.0-OUTD |
PVI-3.6-OUTD |
PVI-4.2-OUTD
|
---|
INPUT PARAMETERS
|
---|
Nominal DC Power [kW] |
3,12 |
3,75 |
4,375 |
Max. Recommended DC Power [kW] |
3,5 |
4,15 |
4,82 |
Operating Input Voltage Range [V] |
0,7xVstart - 580 (360 nominal) |
Full Power MPPT input voltage range (symmetrical load) [V] |
156-530 |
120-530 |
140-530 |
Absolute Max. Input Voltage [V] |
600 |
Activation voltage "Vstart" [V] |
200 nominal (adjustable within the range 120Vdc-350Vdc, independently/each input)
|
No of independent MPPT trackers |
2 |
Max. Input Power, each MPPT [kW] |
2 |
3 |
No. of DC Inputs |
2 1/ MPPT |
3 2 / MPPT1 1 / MPPT2 |
Max. DC Current, each MPPT [A] |
10 |
16 |
DC Connection |
4 (2 pos, 2 neg) |
6 (3 pos, 3 neg) |
MultiContact
Ø 4mm (male - positive input + female - negative input) |
Mating cable connector included |
Conductor cross section: 4-6mmq/AWG12-10 - Cable Ø w/insulator: 3-6mm |
INPUT PROTECTION |
---|
Reverse polarity protection |
Yes |
Fuse rating, each input (-FS suffix versions only) |
NA |
NA |
NA |
Thermally Protected DC side varistor |
4 2 / MPPT |
PV array Insulation Control |
according to VDE0126-1-1 |
DC Switch (-S/-FS suffix versions only) |
Integrated (Max. Voltage Rating : 600Vdc / Max Current Rating: 25A)
|
OUTPUT PARAMETERS |
---|
Nominal AC Power [up to 50°C, kW] |
3 |
3.6 |
4.2 |
Max. AC Power [kW] |
3.3 |
3.96 |
4.6 |
AC Grid Connection |
single phase ( Live, Neutral, PE ) |
Nominal AC Voltage Range [V] |
200-245 (230 nominal) |
Maximum AC Voltage Range [V] |
180-264 (may vary to comply with local regulation) |
Nominal AC Frequency [Hz] |
50 |
Max. AC Line Current [A] |
14,5 |
17,2 |
20
|
AC Connection |
Screw terminal block |
Conductor cross section: Solid 0,5-16mmq / Stranded: 0,5-10mmq / AWG20-6 |
Cable Gland: M32 - Cable Ø: 13-21mm |
Line Power Factor |
1 |
AC Current Distortion [THD%] |
<3,5% at rated power with sine wave voltage |
OUTPUT PROTECTION |
AC side varistors |
2 ( Live - Neutral / Live - PE ) |
Ground fault protection (AC + DC leakage current) |
according to VDE0126-1-1
|
CONVERSION EFFICIENCY |
Max. Efficiency |
96,80% |
Euro Efficiency |
96% |