Request a Quote!


  Home >

Phocos Dingo D2020N > 20 Amp 12/24/32/36/48 Volt PWM Charge Controller
Phocos Dingo D2020N > 20 Amp 12/24/32/36/48 Volt PWM Charge Controller


 
Warranty: 2 Years

Stock Status:(Out of Stock)

Availability: This product is no longer available.
Product Code: PHOCOS-D2020N
 

Description Datasheet
 

Phocos > 20 Amp 12/24/32/36/48 Volt PWM Charge Controller

Manufacturer Part Number: Dingo D2020N

Phocos’ DINGO charge controller has a negative ground that makes it a great option to be used in vehicles. Its communication interface uses the MODBUS protocol, which has been tried and tested in harsh environments.

The DINGO’s large memory allows data such as charging Ah, load Ah, battery voltage range and the daily state of charge for 512 days. The data of the past 99 days can be accessed directly using the LC display with LED backlighting.

Specifications

Type Dingo D2020N
Nominal Voltage 12/24/32/36/48 V (Selectable)
Max. Charge/Load Current 20A
Float Charge 13.0 V - 60.0 V (Adjustable)
Boost Charge 13.5 V - 66.0 V (Adjustable)
Equalization charge 14.0 V - 68.0 V
(Adjustable) (at least every 30 days)
Load disconnect voltage
Reconnect level 		10.0 V - 50.0 V
11.0 V - 64.0 V (Adjustable)
Max. panel voltage 100 V
Temperature compensation (charge voltage) Default: -5mV/K per cell (Adjustable)
Self-consumption 9mA@12 V - 26mA@60 V
Grounding Negative ground
Max. elevation 13,000 ft (4,000 m) above sea level
Battery type Lead Acid (AGM, GEL, flooded)
Max. wire size 6 AWG (16 mm 2)
Dimensions 5.4" x 4.8" x 1.8" in
Weight 8.6 oz.
Type of protection IP20

Documentation

Data Sheet Phocos Dingo D2020N PWM Charge Controller
Owner's Manual Phocos Dingo D2020N PWM Charge Controller
Warranty Phocos

Features

Programmable

  • User-programmable charge regime and low-voltage disconnect
  • Powerful event control feature can be programmed for the load port and/or a general purpose, voltage-only port
Informative
  • Up to 512 days of battery data storage
  • Back-lit LCD display shows real time and 99-days of historical data
Hybrid Control
  • Auto generator start feature ideal for backup diesel and fuel cell generators
  • Terminals can be configured as diversion load controllers for wind/hydro charging inputs
Robust
  • Operates at full charge and load current simultaneously up to +50C
  • Fully protected against reverse battery and PV polarity

Share your knowledge of this product with other customers... Be the first to write a review