Request a Quote!


  Home >

Midnite Solar MNE250SMA-3PH-Master-E > SMA Solar 3-Phase Master E-Panel

Midnite Solar MNE250SMA-3PH-Master - SMA Solar 3-Phase Master E-Panel


 
Alternative Views:


Warranty: 5 Years
Compliance: Buy American

Stock Status:(Out of Stock)

Availability: This product is no longer available.
Product Code: MIDNITE-MNE250SMA-3PH-MASTER-E
 

Description Datasheet
 

Midnite Solar SMA 3-Phase Master E-Panel

Master E-Panel in a 3 phase system. Two slaves are also required for 3 phase.

Model MNE250SMA-3PH-Master-E
Series E-Panel - SMA
Manufacturer Midnite Solar
Dimensions (W x H x D) 25" x 23" x 14"
Weight 40 lbs
Additional Info Data Sheet

The 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)

This E-Panel does not come with a relay board, RS485 (485USPD-NR) boards or MNSPD lightning protection. RS485 boards are required when AC Coupling to SunnyBoy inverters if 3 stage charging is desired. One RS485 board goes into the master inverter and each SunnyBoy Inverter. AC Coupling to a SunnyBoy or any other grid-tie inverter is possible without RS485 boards. The Sunny Island inverter will frequency shift based on battery voltage to knock the grid-tie inverter off line. SunnyBoy inverters can switch between off-grid and grid-tie mode automatically when RS485 boards are used. To program this feature you must use either SMA service cable (USBPBS) or SMA web box (SUNNYWEBBOXU).


Share your knowledge of this product with other customers... Be the first to write a review