Request a Quote!

  Home > Solar Panel Mounts > IronRidge >

IronRidge XR 10 Splice > 12" Mill Finish

IronRidge XR 10 Splice, XR-10-SPLC
IronRidge XR Splice

Our Price: $5.25
Warranty: 20 Years
Compliance: Buy American

Availability: Limited inventory. Discontinued Item.
Call for availability.
Product Code: IRONRIDGE-XR-10-SPLC


IronRidge XR 10 Mill Finish Splice 12"

Model XR-10-SPLC
Series XR 10
Manufacturer IronRidge
Finish Mill
Size 12" x 1" x 1.75"
Application Pitched Roof

Manufacturer's Description

XR Rails can be easily extended with our patented internal splice bars. The internal splice bars do not interfere with clamping or with mounting, and offer a near seamless appearance. XR Rail Splices are made with extruded 6000 series aluminum. Self-drilling screws are included.

Tools for Installation

  • 5/16 socket
  • Tape Measure or Ruler

Installation Steps

  1. Slide the internal splice halfway into the internal cavity of the rail. It should extend approximately six (6) inches into the cavity of the XR100 Standard Rail.
  2. Using one (1) self-drilling, self-tapping screw, one (1") inch from the edge of the XR100 base rail, secure the internal splice in the rail as shown in the main item picture.
  3. The screws will drill through both the XR100 Standard rail and the splice into the central cavity of the internal splice.
  4. Slide the second XR100 base rail over the internal splice until the two XR100 base rails are butting together tightly and evenly.
  5. Then drive one (1) self-tapping screw through the second XR100 base rail, again about one (1") inch from the edge--occupying the same horizontal location as the first XR100 rail.
  6. Repeat these steps for installing any remaining XR100 Standard rail splices.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Panel Mounts > IronRidge
Solar Panel Mounts > IronRidge > XR Mounting System
Solar Panel Mounts
Solar Panel Mounts > IronRidge > XR Mounting System > XR Rails & Standoffs