Request a Quote!


  Home >

Iota IQ-PARALLEL > Smart Controller specialized for Parallel Charging Applications
Iota IQ-PARALLEL > Smart Controller specialized for Parallel Charging Applications


 
Alternative Views:



Stock Status:(Out of Stock)

Availability: This product is no longer available.
Product Code: IOTA-IQ-PARALLEL
 

Description Datasheet
 

Iota > Smart Controller specialized for Parallel Charging Applications

Manufacturer Part Number: IQ-PARALLEL

Specialized for Parallel Charging Applications The IQ-PARALLEL includes a customized cord for 4-stage charging control of two DLS Chargers operating in parallel.

Features

Charging Profile
The IQ-PARALLEL progresses through the following stages while charging your batteries:

  • Bulk
    The Bulk Stage of the IQ4 allows the batteries to be charged from the full rated output of the charger. This increased charging period reduces the overall charging time of the battery.
  • Absorption
    After the Bulk Stage, the IQ4 then moves to the Absorption Stage. This mode will continue for up to 480 minutes (8 hours) to ensure that the battery receives a complete charge.
  • Float
    During the Float Stage, the IQ4 reduces the DLS charge voltage. This reduced voltage maintains the full charge while minimizing 'gassing' of the battery. The IQ4's float stage prevents boiling and bulging of the battery caused when the battery is exposed to higher charging voltages for too long.
  • Maintenance
    If the batteries remain in a "float stage" for a seven-day period, the IQ4 will switch the DLS charger into a pre-programmed Maintenance Stage. This protects the life of your battery by dissolving any sulfate layer on the battery's internal plates and avoids stratification that can occur when a battery has not been in use for extended periods.

Installation

The IQ Smart Charge Controller easily plugs into the Dual Voltage Jack* of your IOTA DLS Battery Charger. Once plugged in, the IQ Smart Charge circuitry is automatically engaged and your IQ module will activate. Your DLS will now provide an automatic and trouble free charging profile to your batteries!

*Location of the Dual Voltage Jack may vary depending on the IOTA DLS Model
Note: External IOTA IQ Smart Charge Controllers are not compatible with DLS with internal IQ charge control.


Share your knowledge of this product with other customers... Be the first to write a review