Request a Quote!

  Home >

Enphase M215-60-2LL-S23 Micro Inverter > 215 Watt TYCO 4MM > ARRA

Enphase M215-60-2LL-S23 - 215 Watt 208 / 240 VAC Micro Inverter - Tyco Connectors

Alternative Views:

Warranty: 25 Years
Compliance: Buy American

Availability: This item is no longer available.
Product Code: ENPHASE-M215-60-2LL-S23

Description Datasheet

Enphase 215 Watt 208/240 VAC Micro Inverter

Model M215-60-2LL-S23
Series M215
Manufacturer Enphase Energy


Type Grid Tie - Micro Inverter
Ambient Temperature Range -40C to +65C
Operating Temperature Range -40C to +85C
Enclosure Outdoor - NEMA 6
Cooling Natural Convection - No fans
Connectors Tyco
Dimensions (W x H x D) 6.8" x 6.45" x 1.0"
Weight 3.5 lbs
Shipping Method Ground

Input (DC)

Recommended PV Power (STC) 190 W - 260 W
Max Voltage 45 V
Nominal Voltage
Peak Power Tracking Voltage 22 V - 36 V
Operating Range 16 V - 36 V
Min/Max Start Voltage 22 V / 45 V
Max Current 10.5 A

Output (AC)

Maximum Output Power 215 W
Nominal Voltage 208 V / 240 V
Voltage Range 183 V - 229 V / 211 V - 264 V
Frequency 60 Hz (North America)
Max Current


  • Maximum energy production
  • Resilient to dust, debris and shading
  • Performance monitoring per module
  • System availability greater than 99.8%
  • No single point of system failure
  • Quick and simple design, installation and management
  • 24/7 monitoring and analysis
  • Low voltage DC
  • Reduced fire risk

Detailed Description

Enphase's simple innovation is to place a single inverter on each solar panel instead of using a single, massive inverter for an entire array. Improved overall efficiency is just one of the host of benefits of per-panel solutions like these "micro inverters": they also significantly reduce the impact of shading issues and are budget-friendly, allowing a system to be built literally a panel at a time.

The M215 is the latest in Enphase's line of micro inverters. Smaller and more efficient than its predecessors, the M215 reduces overall cost by shifting some of its burden towards the specially designed "Engage" cabling system. This product works with 60-cell solar modules only.

Frequently Asked Questions
  • How many drops of Engage cable do I need?

    Each drop has a special M215 connector right in the middle, so you will need one drop for each M215 in your array. Be sure to add an extra drop for each row after the first to allow the cable reach up to the next row. Also note that you can have a maximum of 17 240VAC or 25 208VAC M215s on one string. If you need any help sizing your Enphase solar system, please give us a call at 888-899-3509 ext. 1.

  • How are the Engage cable drops cut?

    Drops are cut at the halfway point between two connectors, allowing about 20" of cable between the last connector and the end of the cable for portrait layout and 33.5" for landscape layout.

  • Do I need 208 or 240 VAC Engage cable?

    208 VAC is usually for commercial projects, while 240 VAC is for residential.

  • Which M215 do I need?

    The difference between the two M215s EcoDirect offers is in their connectors, so your choice depends on whether your panels have an MC4, Tyco, or SMK connector. We also offer an Ontario FIT M215 for those in Ontario, Canada.

Enphase ET17-208-BULK > 240 Drops Engage Cabling / LANDSCAPE / 208 VAC
Our Price: $6,274.00

Enphase Engage Cabling > 208 VAC, 240 Connectors, Landscape > ET17-208-BULK
Enphase ET10-240-BULK > 240 Drops Engage Cabling / PORTRAIT / 240 VAC - Quantity 240 Units
Our Price: $4,705.00

Enphase Engage Cabling > 240 VAC, 240 Connectors, Portrait > ET10-240-BULK
Enphase ET17-240-40 > 40 Drops Engage Cabling / LANDSCAPE / 240 VAC
Our Price: $960.00

Enphase Engage Cabling > 240 VAC, 40 Connectors, Landscape > ET17-240-40
Enphase ET10-208-30 > 30 Drops Engage Cabling / PORTRAIT / 208 VAC
Our Price: $709.55

Enphase Engage Cabling > 208 VAC, 30 Connectors, Portrait > ET10-208-30

Share your knowledge of this product with other customers... Be the first to write a review