Request a Quote!


  Home >

Schneider Electric RNWC35 > C35 35 Amp 12/24 Volt PWM Charge Controller
Schneider Electric RNWC35 > C35 35 Amp 12/24 Volt PWM Charge Controller


 
Warranty: 2 Years

Stock Status:(Out of Stock)

Availability: This item is no longer available.
Product Code: SCHNEIDER-TRACE-RNWC35
 

Description Datasheet
 

Schneider Electric RNWC35 > C35 35 Amp 12/24 Volt PWM Charge Controller

Manufacturer Part Number: RNWC35

The Schneider Electric C35 is a controller for virtually any DC charging source. The C35 is field configurable for 12 and 24 VDC operation. It can be used as a charge, diversion, or load controller and comes with a standard multi-color charge status LED. It is a fully solid state, microprocessor-driven controller that is UL and cUL listed.

Features

  • 12 A for 12 V batteries (Xantrex C12 PMW)
  • 35, 40 and 60 A for 12, 24 and 48 V batteries (48 V only Xantrex C40 PMW)
  • Silent, pulse width modulated (PWM), high effi ciency operation
  • Electronic protection against short-circuit, overload, over-temperature and reverse polarity conditions
  • Automatic overload protection in both active and passive models
  • Easy to read, front panel status LED
  • Durable construction
  • Field adjustable voltage and battery set points
  • Can control lights (Xantrex C12 PMW)
  • Optional operation as diversion load controller (Xantrex C35, C40, C60 PMW)

Specifications

Model RNWC35
Voltage Configurations 12 and 24 VDC
Max. PV Open Circuit Array Voltage 55 VDC
Charging / Load Current at 25° C 35 amps DC
Max. Peak current 85 amps
Max. Voltage Drop through Controller 0.30 volts
Typical Operating Consumption 15 ma
Typical Idle Consumption 3 ma
Recommended Breaker Size 45 amps
Recommended Wire Size #8 AWG
Lead Acid Battery Settings Adjustable
NiCad Battery Settings Adjustable
Specified Temperature Range 32° F to 104° F (0° C to 40° C)
Enclosure Type Indoor, ventilated, powder coated steel with 3/4" and 1" knockouts
Unit Weight 2.5 lb (1.2 kg)
Dimensions (H x W x D) 8.0 x 5.0 x 2.5" (20.3 x 17.8 x 6.4 cm)
Shipping Weight 3.0 lb (1.4 kg)
Shipping Dimensions (H x W x D) 12.4" x 7" x 2.5" (31.5 x 17.8 x 6.4 cm)
Mounting Vertical wall mount - indoor only
Altitude - Operating 15,000' (4,572 m)
Altitude - Non-Operating 50,000' (15,240 m)
Warranty Two years

Options

  • Display Panel: CM, CMR/50 or CMR/100-A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included.
  • Battery Temperature Sensor: BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included.

Detailed Description

Silent Microprocessor Control

All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.

PWM Charge Performance

C Series controllers all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life.

3-Stage Battery Charging

All C Series controllers automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries' actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation.

Field Adjustable

There are a number of field configurable, user adjustments for C Series controllers. C35 and C60's can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries.

DC Load Controller Mode

When used as a load controller, the C Series will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable.

DC Diversion Mode

In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load.

LED Status Indicator

A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers.

UL and cUL Listed

C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are "real world" and do not have to be derated to comply with USA NEC 125% over-current requirements.

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review.

Accessories
Schneider Electric RNW865101401 > XW+ Power Distribution Panel > XW PDP - without AC Breakers
Our Price: $1,150.00

Add
Schneider Electric RNW865101401 > XW+ Power Distribution Panel > XW PDP - without AC Breakers


  0 of 0 people found the following review helpful
 
5 of 5 Xantrex C35 - 35 Amp 12/24 Volt PWM Charge Control April 2, 2013
Reviewer: Jim Walsh from St. Johns, AZ United States  
I purchased the C35 and in 3 days it was delivered and I installed it that day and it is up and running and doing just what it is suppose to after a small adjustment for my type of batteries. GREAT JOB ECODIRECT. Will use again soon. Jim W

Was this review helpful to you?

  0 of 0 people found the following review helpful
 
4 of 5 Battery Charge Controller February 7, 2011
Reviewer: Barbara Brown from Eagan, MN United States  
Very pleased to be able to find this source, purchase and receive the part when we needed it.

Was this review helpful to you?