Schneider Electric > Conext XW+ - Mini Power Distribution Panel

For Conext XW+ Inverters
Part Number: RNW865101301

NEW from Schneider Electric - the XW+ Mini PDP! For years, installers have used the standard Conext XW+ Power Distribution Panel for all of their XW+ installations. That product was designed for up to 3 XW+ inverters allowing room for expansion on a single or double inverter system. Now there is a solution for single inverter installations that require the robust form and functions of the XW+, yet help keep costs to a minimum. The XW+ Mini PDP ships with breakers, bus bars, and cables, to install a single XW+ inverter/charger.

Features:

Single-phase split-phase or three phase systems Configure to the left or right side of the XW+ inverter/chargers Multiple field configurable conduit entry points on the back, bottom, top and sides DIN Rail mounting for QOU type and Multi-9 AC breakers Breaker configuration allows XW+ inverter/chargers to be AC bypassed for easy servicing

The Conext XW+ Mini Power Distribution Panel includes and comes pre-wired with:

Field-reversible panel door and wall mount bracket XW+ Conduit Box Three 60 A, 120/240 Vac, two-pole, Square-D, type QOU260, DIN-rail mounted AC breakers for AC input, bypass and AC load, plus one additional expansion position for two pole AC breaker, type QOU260 One GJ 250A 160 Vdc, 3/8” stud DC breaker installed Two expansion positions for charge controller DC breakers (PV array or battery) Termination lugs for ground, common and battery connections Integrated DC busbars for direct connection to XW+ DC terminals 3/8" hardware for connection of DC cables to busbars Cable ties for cable management Plastic knockout bushings for connection between Mini-PDP and XW/XW+ unit

Documentation