Schneider Electric Conext XW+ 5548 NA - 5.5kW 120/240 VAC Hybrid Inverter/Charger
Manufacturer Part Number: 865-5548-01
Specifications
Model
|
XW+ 5548 NA
|
Series
|
Conext XW+ NA
|
Manufacturer
|
Schneider Electric
|
Part Number
|
865-5548-01
|
Mechanical
Type
|
120/240 VAC Hybrid Inverter/Charger
|
Operating Temperature Range
|
-25°C to 70°C (-13°F to 158°F)
(power derated above 25°C (77°F)
|
Enclosure
|
NEMA Type 1 Indoor
|
Dimensions (W x H x D)
|
23" x 16" x 9"
|
Weight
|
118 lbs
|
Shipping Method
|
165 lbs
|
Inverter AC output
Output power (continuous) at 25°C
|
5500 W
|
Overload 30 min / 60 sec at 25°C
|
7000 W / 9500 W
|
Output power (continuous) at 40°C
|
4500 W
|
Maximum output current 60 seconds (rms)
|
82 A (120 V); 41 A (240 V)
|
Output frequency (selectable)
|
50 / 60 Hz
|
Output voltage
|
L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
|
Total harmonic distortion (THD) at rated power
|
< 5%
|
Idle consumption search mode
|
< 8 W
|
Input DC voltage range
|
42 to 60 V (48 V Nominal)
|
Maximum input DC current
|
150 A
|
Charger DC Output
Maximum output charge current
|
110 A
|
Output voltage range
|
40 - 64 V (48 V Nominal)
|
Charge control
|
Three stage, two stage, boost, custom
|
Charge temperature compensation
|
Battery temperature sensor included
|
Power factor corrected charging
|
0.98
|
Compatible battery types
|
Flooded (default), Gel, AGM, LiON, custom*
|
Batter bank range (scaled to PV array size)
|
440 - 10000 Ah
|
AC Input
AC 1 (grid) input current (selectable limit)
|
3 - 60 A (60 A default)
|
AC 2 (generator) input current (selectable limit)
|
3 - 60 A (60 A default)
|
Automatic transfer relay rating / typical transfer time
|
60 A / 8 ms
|
AC input voltage limits (bypass/charge mode)
|
L-N: 78 - 140 V (120 V nominal)
L-L: 160 - 270 V (240 V nominal)
|
AC input frequency range (bypass/charge mode)
|
55 - 65 Hz (default); 52 - 68 Hz (allowable)
|
AC Grid-Tie Output
Grid sell current range on AC1(selectable limit)
|
0 to 40 A (120 V) / 0 to 20 A (240 V)
|
Grid sell voltage range on AC1
(auto adjusts entering sell mode)
|
L-N:105.5 to 132 +/- 1.5 V
L-L: 211 to 264 +/- 3.0 V
|
Grid sell frequency range on AC1
(auto adjust entering sell mode)
|
59.4 to 60.4 +/- 0.05 Hz
|
Detailed Description:
General
Schneider Electric brings the next generation of inverter/charger to market, with the XW Hybrid Inverter/Charger, the heart of the XW System. The XW Hybrid Inverter/Charger (XW) is a true sine wave, 230 VAC, split-phase, inverter/charger that incorporates a DC to AC inverter, a battery charger, and an AC auto-transfer switch. It is the foundation for battery- based residential and commercial applications up to 18 kilowatts (kW). Capable of being grid-interactive or grid-independent, the XW can operate with generators and renewable energy sources to provide full time or backup power.
XW Charge Controller
Xantrex expects the system designer to use the XW Charge Controller with their inverters. Their sizing tools assume the XW Charge Controller. Most importantly, Xantrex handles the Ground Fault Protection (required by National Electric Code 2008 in all systems) in the charge controller. If you do not use the Xantrex XW Charge Controller then the GFP must be handled in a different way.
Conext™ XW+ is an adaptable single-phase and three-phase inverter/charger system with grid-tie functionality and dual
AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further
adaptability. From a single Conext XW+ unit to clusters up to 102 kW, the Conext XW+ is a scalable system that allows
for the integration of solar capacity as required. Adaptable and scalable, the Schneider Electric Conext XW+ system is
the one solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications.
The Conext XW+ is the next generation of the highly successful Conext XW hybrid inverter.
Featuring higher power ratings, Conext XW+ also has better battery
management, including support for lithium-ion technology. Its superior
BOS integration further simplifies installation. It can be used for both
DC- and AC-coupled systems and is suitable for large hybrid
applications up to 102kW.
Why choose Conext XW+ NA?
Higher return on investment
- Excellent load starting with high 30-minute and 5-second power
- Performs in hot environments up to 70°C
- Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads
- Backup power with grid-tie functionality converts external DC power to AC power for export to the utility grid
Designed for reliability
- Extensive quality and reliability testing
- Highly Accelerated Life Testing (HALT)
- Globally proven and recognized field performance
Flexible
- Single or three phase systems from 7.0 kW to 102 kW
- Supports DC coupled and AC coupled off-grid and grid-tie architectures
- Supports charging of Lithium Ion battery packs
Easy to service
- Field serviceable with replacement boards and spare parts
- Monitor, troubleshoot or upgrade firmware with Conext ComBox
Easy to install
- System configures quickly into compact wall-mounted system
- Integrates both grid and generator power with dual AC inputs
- Balance of system components integrates battery bank, solar charge controllers and generators
- Commission the entire system with PC software tool and Conext ComBox