 |
 |
 |
|
Samlex 50 Amp 12 Volt Battery Charger
This Ul-listed battery charger from Samlex is a great choice for automotive, RV, marine, battery backup, and communications applications. Formerly the SEC-1250A.
Specifications:
| Model |
SEC-1250A / SEC-1250UL |
| Series |
12V Battery Chargers |
| Manufacturer |
Samlex America |
| Additional Info |
Data Sheet |
Mechanical
| Operating Temperature |
0° C - 40° C |
| Dimensions |
13.03" x 9.60" x 3.82" |
| Weight |
9.0 lbs |
| Shipping Method |
Ground |
Input
| Input Voltage |
120 VAC or 230 VAC |
| Input Frequency |
50 Hz - 60 Hz |
| Input Current |
10.4 A |
Output
| Output Voltage |
Bulk: 13.5 V
Absorption: 14 V
Float: 13.5 V |
| Output Current |
50 A |
Detailed Description
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source.
- Switch mode technology for high efficiency, lightweight and quiet operation
- Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
- Can charge 2 banks of batteries simultaneously, no isolator necessary
- Can be used as a power supply or DC UPS when used in conjunction with a battery
- User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
- User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
- "Half Power Mode" reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
- Voltmeter and Ammeter for monitoring
- Fan cooled based on output current
- Protections: Short circuit, overload, reverse battery connection and over temperature
- Optional remote LED panel with 33' cable (model: 900-RC) for remote ON/OFF control and indication of charging status
- Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
- Safety certified and listed to UL Standard UL-1564
- EMI Compliant to FCC Part 15(B), Class B
By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
|
|
|
 |
|
 |
|
