Midnite Solar MNPV6 DISCO Disconnecting Combiner

This 3R MNPV6 DISCO combiner is one in a series of disconnecting PV combiners from MidNite Solar.

Features

• Convenient disconnect handle
• All aluminum powder coated housing that won’t rust
• Flip up cover that can stay in the open position during installation
• PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Chassis ground bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Standard din rail to mount up to 6, 150V or 3, 300 Volt breakers
• 120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
• Dead front cover snaps into place after wiring is complete for safety
• Knockouts for PV in and PV out on bottom and sides
• Top surface is available to bring conduit in from directly above the enclosure

This model will support several different configurations. You can use 6 of Midnite's 150 volt DC breakers and included bus-bar for a 6 string disconnecting combiner. You also will be able to install one of Midnite's 600 volt DC breakers making a nice grid tie disconnect.

The MNPV6 Disco is very flexible. It is ETL listed for AC and DC, allowing it to be configured for a variety of uses. It will work with 1 to 6 of Midnite's 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter.

This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.