Magnum Energy 2200 Watt 12 Volt Off-Grid Inverter
Modified Sine Wave
Manufacturer Part Number: RD2212
The RD Series Inverter / Charger is a new generation modified sine wave inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.
Features
- Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.
- Versatile mounting: Mount the RD Series on a shelf or wall.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded transfer relay: 60 Amp transfer service is available on all models.
- Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.
Specifications
Waveform |
Modified Sine Wave |
Input Battery Voltage Rance |
9 - 16 VDC |
Nominal AC Output Voltage |
120 VAC |
Output Frequency and Accuracy |
60 Hz +/- 0.1% |
Continuous Power Output at 25° C |
2200 VA |
Maximum continuous input current |
293 ADC |
Peak Inverter Efficiency |
95% |
Dimensions (L x W x H) |
13.75" x 12.65" x 8.0" (34.9 x 32.1 x 20.3 cm) |
Weight |
37 lbs |
Detailed Description
Introducing the RD Series Inverter/Charger - a new generation inverter designed specifically for Renewable Energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective. Install the RD Series in four easy steps: Simply connect the inverter's output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Power Factor Corrected (PFC) Charger:
Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable:
The RD Series is ETL Listed to the stringent requirements of UL 1741 (USA only), ensuring that the inverter is safe and reliable.
Easy-to-install:
Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.