|
|
|
|
Magnum Energy PT-100 > Power Track 100 Amp 12/24/48V MPPT Charge Controller
Manufacturer Part Number: PT-100
The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to
harvest the maximum available energy from the PV array and deliver it to the batteries.
The PT-100’s MPPT algorithm finds the maximum power point of the array and
operates at this point while regulating the output current and battery voltage to fully
charge the battery.
Included in box: PT-100 Charge Controller, 15' BTS
(Battery Temp Sensor), 6' Network Communication Cable (300V), 6'
Extension Cable (300V), Back mount bracket (2 pieces) with 4 screws,
Ground Fault Warning label, PT-100 Owners Manual
Features
-
Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency
-
Multi-state Charging for maximizes system performance and improves battery life
-
Optimal Battery Charging using an included external temperature sensor
for optimum battery charging, even during extreme temperature changes
-
Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage
-
GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering
-
AFCI: An integrated PV Arc-Fault Circuit Interrupter detects,
indicates, and extinguishes series arcs. The AFCI is designed to meet
the new National Electric Code (NEC) Article 690.11 requirements
-
Extensive Electronic Protection: Over-temperature protection, power
derating when temperature is high, PV short circuit and high PV input
shutdown, output overcurrent protection and night-time back-feed
(reverse current) protection
-
Supports large PV arrays - a single controller supports a large PV array up to 6600W
-
High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode
-
Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
-
Convenient Installation - Run all of the wiring to the unique,
remain-in-place wiring box with ease prior to installing the full PT-100
unit
-
On-site Updates - The PT-100’s software can be updated on site
-
Easy MP and MMP integration - The PT-100 is designed to work with a
Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and
access to PV and battery disconnect breakers
-
Optional ME-ARC50 Remote
works with internal data-logging functionality that keeps energy
harvest information and battery Ah/Wh data for up to 255 days. It is the
only remote, currently, that works with the PT-100 menus.
Specifications
Model
|
PT-100
|
Series
|
Power Track
|
Manufacturer
|
Magnum Energy
|
Mechanical
Type
|
MPPT
|
Applications
|
Renewable
Energy Systems • Off-grid Power • Back-up Power
|
Dimensions (W x H x D)
|
8.5" x 15.5" x 4.0"
|
Weight
|
12.5 lbs
|
Shipping Method
|
Ground
|
Input (DC)
Rated Current
|
100 A
|
Operating Voltage
|
187 V
|
Battery Charging Voltage
|
10 - 66 VDC
|
|
|
|
|
|
|
|
|
|