IronRidge > Flash FX, Flashing for FX Rail-Less System, Black Finish - 1 Unit
IronRidge Flash FX, Rail-Less Flashing, without Hanger-Bolt, Qty 1
Model
|
FX-Flash-B
|
Series
|
FX
|
Manufacturer
|
IronRidge
|
Finish
|
Black
|
Quantity
|
1 Unit
|
Product Description
Flash FX and composition shingle roofs are linked securely with Flash FX, which maintains a water-tight seal at 7/8" above the roof deck.
IronRidge FX fully eliminates all rails and clamps from the mounting system, revolutionizing solar installation. Mounts and Bridges are used by FX to support and connect solar modules into a single, interconnected array.
Provides structural anchors with complete water protection.
- Water seal elevated an entire inch above roof plane.
- UL441 rain tested and TAS-100 wind-driven rain tested.
- Corrosion resistant parts for lifelong performance.
Features
No Rails. No Clamps. No Problem.
IronRidge FX revolutionizes solar installation by completely removing both rails and clamps from the mounting system. FX uses Mounts and Bridges to structurally support and electrically bond solar modules into a single, interconnected array.
The entire installation requires just one tool, with most steps being tool-free.
- Rail & Clamp Free
Instantly attach modules with GripFit Technology.
- Level at Anytime
Adapt to roof undulation and fix other leveling challenges at any time.
- Single-Tool Installation
Use the same socket size on all parts, from lag to lug.
- UL 2703 Listed System
Entire system and components meet latest UL 2703 standard.
- PE Certified
Pre-stamped engineering letters available for most states.
- 20-Year Warranty
Twice the protection offered by competitors.