Request a Quote!


  Home > Miscellaneous > AceClamp JR >

  Unirac 004035M > AceClamp JR End Clamp Mounting Kit, Size D, Clear

Unirac 004035M - AceClamp JR End Clamp Mounting Kit, Size D, Clear


 
Our Price: $4.35
Warranty: 10 Years
Compliance: Buy American

Product Code: UNIRAC-004035M
Qty:

Description Data Sheet
 

Unirac AceClamp JR End Clamp Mounting Kit

Size: D
Finish: Clear Anodized
Manufacturer Part Number: 004035M

ACECLAMP JR. 1/4” is used with clamps sold separately below for direct attachment to standing seam metal roofs. Purchase one AceClamp JR and one Mounting Kit per attachment, usually one per standing seam. This mounting kit fits size D modules (38 - 40 mm / 1.50 - 1.57 in. thick). For more sizes, see the chart below:

UniracModule ThicknessBolt Length
A24 - 26 mm
0.94 - 1.02 in
2
B30 - 32 mm
1.18 - 1.26 in
2
C 34 - 36 mm
1.34 - 1.42 in
2
D 38 - 40 mm
1.50 - 1.57 in
2 1/2
K 39 - 41 mm
1.54 - 1.61 in
2 1/2
J 41 - 43 mm
1.61 - 1.69 in
2 1/2
F 45 - 47 mm
1.77 - 1.85 in
2 1/2
M 47 - 49 mm
1.85 - 1.93 in
2 1/2
E 50 - 52 mm
1.97 - 2.05 in
2 1/2
N 57 - 59 mm
2.24 - 2.32 in
2 1/2
H Sanyo lipped modules 1 1/2
G Sharp lipped modules

AceClamp JR: Seamed Metal Roof Mounting Solution

Unirac is pleased to present ACECLAMP JR, our latest solution for mounting rails to a standing seam roof. Innovative and affordable, ACECLAMP JR is designed to provide a superior, non-penetrating method for attaching solar modules to any of the popular seamed metal roofing systems.

When compared to other solutions, this innovative two piece design has only one bolt with a “top down” clamping mechanism that installs faster than any other standing seam attachment on the market today.

ACECLAMP JR’s increased attachment surface allows for an improved load distribution when compared to single contact point solutions. The wider clamp means less scratching of roof surfaces, decreasing the possibility of damage and corrosion when compared to other solutions.

The ACECLAMP JR supports both “rail free” and “railed” solutions. When deployed in a “rail free” or “direct connect” configuration, use the ACECLAMP JR with a 1/4” (6mm) module mounting connection. Solar modules can be attached directly to the ACECLAMP JR using any of Unirac’s top mounting hardware. We offer the ACECLAMP JR separately from the ACECLAMP top mounting hardware. The ACECLAMP Top Mounting hardware includes the appropriate bolt and top mounting clamp for your application. These are sold separately to allow you to mix and match top mounting hardware with the ACECLAMP.

If a “railed” solution is required, ACECLAMP JR with the 3/8” (10mm) mounting connection can be used to secure any Unirac rail solution to ACECLAMP JR. SolarMount rail and ACECLAMP JR also supports a tilted orientation of solar modules. Rail attachments should be ordered separately.

The ACECLAMP JR meets the need for speed and low cost when installing solar modules on seamed metal roofing systems and it will not invalidate the roofing system’s warranty. The ACECLAMP JR also features a 20-year limited warranty.

As always, Unirac strongly suggests that the roofing manufacturer and a structural engineer be consulted before a solar array is installed on seamed metal roofing systems.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Miscellaneous > AceClamp JR
End Clamps
Miscellaneous
Solar Panel Mounts
Mill (No Finish)
ARRA
Solar Panel Mounts > Roof Mounts