Home > Charge Controllers > Specialty Concepts Controllers >

  Specialty Concepts Mark 15/12 Flush Mount w/display, PWM Charge Controller, 15 amps, 12 volts
  Specialty Concepts Mark 15/12 Flush Mount w/display, PWM Charge Controller, 15 amps, 12 volts
Specialty Concepts Mark 15/12
  
Our Price:


Availability: Currently Unavailable
Product Code: SPECIALTY-CONCEPTS-MARK-15-12
 


Description
 
Specialty Concepts Mark 15/12 Flush Mount w/display, PWM Charge Controller, 15 amps, 12 volts

Product Description:

The MARK/15™ and MARK/22™ are solid-state charge controllers for use in PV systems with currents up to 22A. They include a full-featured LCD meter to display battery voltage, array current and charge set-point. They are intended to flush-mount within a wall for a very distinctive appearance.

The MARK/15 IS UL RECOGNIZED.

General Specifications:

    * Fuse protection on both battery and array
    * Easy-to-use LCD display
    * Bargraph battery condition indicator
    * Controls up to 15 or 22 Amps of array current
    * Available in 12 volt (standard)
    * Guaranteed to FULLY CHARGE a COMPLETELY DEAD battery

FEATURES

    * 100% solid-state
    * Designed for rugged mobile use
    * Over-current protection - battery fuse, array fuse
    * Reverse leakage protection - blocking diode
    * Reverse polarity protection
    * Lightning protection
    * Input noise suppression
    * Low power consumption
    * 12 AWG terminal block for 15A model, 10 AWG terminal block for 22A model

DIGITAL MONITORING

    * System battery voltage
    * Solar charge current
    * Charge set-point calibration

ADDITIONAL INFORMATIVE DISPLAY FEATURES:

    * "Solar Charging" light
    * "Battery Charged" light
    * LED bar-graph "Battery Condition"indicator
    * Bar or dot display
    * Power saver display mode Mounting
    * Flush mount
    * Knock-out box available for wall mounting (4x7 BOX accessory)

 
PARAMETERS
UNITS
Mark/15-12
Mark/15-24
Nominal Voltage
(Volts) 12 24
Array Voltage, Max (Voc) (Volts) 26 52
Array Current, Continuous (Isc) (Amps) 15 15
Array Current, Max (60 seconds) (Amps) 20 20
Load Current, Continuous (1)(3) (Amps) 10 10
Load Current, Max (60 seconds) (1)(3)(5) (Amps) 13 13
Operating Voltage at Battery, Min      
Charge Control (Volts) 0 0
Load Disconnect (LVD) (1) (Volts) 8.5 19.0
LCD Metering (Volts) 7.8 18.0
LED Bar-graph (Volts) 10.5 21.0
Current Consumption      
Quiescent (Tare) (Milliamps) 8.8 8.8
Charging (w/ LED Bar-graph off) (Milliamps) 12.8 12.8
LED Bar-graph (mA per LED) 5 5
Load Disconnected (1)(4) (Milliamps) 40 40
Charge Termination, Factory Set (Volts) 14.4 ± .2 28.8 ± .4
Charge Termination, Adjustable Range (6) (Volts) 13.6 – 15.3 27.2 – 30.6
Charge Resumption, Factory Set (6) (Volts) 13.0 ± .2 26.0 ± .4
Load Disconnect (LVD), Factory Set (1) (Volts) 11.5 ± .2 23.0 ± .4
Load Disconnect, Adjustable Range (7) (Volts) 10.7 – 12.2 21.4 – 24.4
Load Reconnect, Factory set (1) (7) (Volts) 13.0 ± .3 26.0 ± .6
Voltage Drop, Array to Battery @ 15 amp      
Controller, Max (Volts) 0.5 0.5
Controller and 2 fuses, Max (Volts) 0.8 0.8
Voltage Drop, Battery to Load, Max. (1) (Volts) 0.6 0.6
LCD Meter Accuracy      
DC Voltage (Volts) 0.5 % 0.5 %
DC Current (Volts) 1 % 1 %
Temperature Comp. Coef. (from 25°C) (2) (Volts/°C) -.03 -.06
Operating Temperature Range (°C) -30 to 50 -30 to 50
Storage Temperature Range (°C) -40 to 70 -40 to 70
Notes:
(1) Low-voltage load disconnect option
(2) Temperature compensation option
(3) Non-inductive.
(4) LVD relay energized, typical value.
(5) Carry only, Non-switching
(6) The Charge Termination / Resumption span is fixed. The Resumption set-point changes as the Termination set-point is adjusted.
(7) The Load Disconnect / Reconnect span is fixed. The Reconnect set-point changes as the Disconnect set-point is adjusted
 

Related Products...
Specialty Concepts ASC 24/8
Our Price: $42.95
Add
Specialty Concepts ASC 24/8, PWM Charge Controller, 8 amps, 24volts
Specialty Concepts ASC 12/16E
Our Price: $70.25
Add
Specialty Concepts ASC 12/16E, PWM Charge Controller, 16 amps, 12 volts, LVD
Specialty Concepts ASC 12/12AE
Our Price: $72.25
Add
Specialty Concepts ASC 12/12AE, PWM Charge Controller, 12 amps, 12 volts
Specialty Concepts ASC 12/12
Our Price: $44.25
Add
Specialty Concepts ASC 12/12, PWM Charge Controller, 12 amps, 12 volts
Specialty Concepts ASC 12/16
Our Price: $54.95
Add
Specialty Concepts ASC 12/16, PWM Charge Controller, 16 amps, 12 volts


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Charge Controllers
Charge Controllers > Specialty Concepts Controllers


Concorde Battery PVX-1040T 12 Volt 104 Amp Hour $257.95
Concorde Battery PVX-890T 12 Volt 89 Amp Hour $225.95
Sharp 230 Watt Solar Panel 24 Volt > ND-U230C1 $675.25
Apollo ASNET Network Card & Cable For Linking T80's $84.95
Concorde Battery PVX-2160T 6 Volt 216 Amp Hour $340.95
EarthLED DesignoLux L Bullet Tip LED Light Bulb 3 Watts Cool White $26.25
PowerUp 5 Watt Solar Panel 12 Volt > BSP-512 $63.95
Southwest WindPower Skystream 3.7 Generator Marine 120-208-240V 60 Hz $6,962.00
Morningstar SunKeeper SK-6, PWM Charge Controller, 6 Amp, 12 Volt $47.25