Solar Warning Label Inspection Kit
This kit includes 63 labels, Thirty one styles and an instructional data card that describes label placement and NEC code pertaining to PV labeling. Our premium 4 mil vinyl and 1 mil Mylar polyester laminated labels are made right here in the USA. They are UV rated for outdoor use and will last for years to come. They are extremely durable and have rounded corners to prevent peeling. We screen print with a vibrant UV resistant red paint and then bake in an oven for a superior finish. The backing is coated with the highest quality permanent adhesive and are easy to apply. The letters are in bold type and headers are in 3/8” type set to comply with the UL969 and NEC requirements.
Includes:
2 X #00S “DO NOT TOUCH TERMINALS”
2 X #01S “IF GROUND FAULT IS INDICATED”
1 X #02S “DO NOT TOUCH TERMINALSDC”
1 X #03S “BIPOLAR PHOTOVOLTAIC ARRAY”
1 X #04S “THE DC CONDUCTORS”
1 X #05S “PV SYSTEMS DC DISCONNECT AMPS & VDC”
1 X #06S “PHOTOVOLTAIC SYSTEM DC DISCONNECT:
1 X #07S “PV SYSTEM AC DISCONNECT – AMPS & VOLTS”
2 X #08S “DUEL POWER SUPPLY”
2 X #09S “INVERTER OUTPUT CONNECTION”
1 X #10S “SINGLE 120VOLT SUPPLY”
2 X #112 “PV POWER SOURCE”
3 X #12S “SOLAR BREAKER IS BACKFED”
2 X #13S “AC DISCONNECT”
2 X #14S “DC DISCONNECT”
1 X #15S “DO NOT OPEN UNDER LOAD”
1 X #16S “ DO NOT DISCONNECT UNDER LOAD”
1 X #17S “PV SYSTEM DISCONNECT”
1 X #18S “SOLAR DISCONNECT”
10 X #19S “CAUTION SOLAR CIRCUIT”
1 X #20S “INVERTER”
2 X #21S “PV POWER SOURCE”
4 X #22S “SOLAR CIRCUIT BREAKER IS BACKFED”
4 X #23S “PV BREAKER – DO NOT RELOCATE”
5 X #24S “ PV SOLAR BREAKER”
3 X #25S “DO NOT RELOCATE OVERCURRENT DEVICE”
2 X #26S “CAUTION SOLAR CIRCUIT CONDUIT WRAP”
1 X #27S “TURN OFF AC DISCONNECT BEFORE WORKING IN PANEL”
1 X #28S “MAIN AC DISCONNECT”
1 X #29S “MAIN DC DISCONNECT”
1 X #30S “SOLAR ELECTRIC SYSTEM CONNECTED”
