OutBack Power SmartHarvest SCCM10-100 > 10 Amp 12/24 Volt MPPT Charge Controller
MPPT Charge Controller
Product Highlights
- 10A/100V Maximum Power Point Tracking (MPPT) charge controller
- Ensures maximum yield from available solar energy
- Integrated LED display for PV and battery status
- Backed by OutBack Power's global sales and support network
Product Description
The most economical means of integrating MPPT technology into any PV system
SmartHarvest's mission is to make the advanced technologies usually associated with premium PV energy systems available to
users regardless of their system sizes or budgets. The SCCM10-100 accomplishes this goal by placing MPPT charge controller
capability within the reach of a much wider application base, ensuring higher system yeilds at the power and size levels where
that advantage can make the most difference.
By maximizing solar energy harvesting under a wider variety of environmental conditions, MPPT technology helps the system extract
as much electricity as possible for more effective energy storage -- making the innovative SCCM10-100 ideal for use in efficiency-driven
applications that can benefit from improved, advanced charger technology.
Documentation
|
Maximum Output Current (I)
|
10
|
|
Nominal Battery Voltages
|
12/24
|
|
Input Panel Power (Wp)
|
150/300
|
|
Panel Intelligence
|
MPPT
|
|
Maximum Input Voltage (Voc)
|
100
|
|
Charging Regulation
|
Four stages: bulk, absorb, float and equalization
|
|
Bulk Voltage (VDC)
|
Flooded: 14.8/29.6 VRLA: 14.6/29.2
|
|
Absorb Voltage (VDC)
|
Flooded: 14.8/29.6 VRLA: 14.4/28.8
|
|
Absorb Time
|
2 hours
|
|
Float Voltage (VDC)
|
Flooded: 13.2/26.4 VRLA: 13.5/27.0
|
|
Equalization Voltage (VDC)
(Flooded Batteries Only)
|
Flooded: 15.5/31.0
|
|
Equalization Time
|
1 hour
|
|
State of Charge Low Voltage
Disconnect (V)
|
11.4/22.8V
|
|
Low Battery Load Reconnect (VDC)
|
12.4/28.8
|
|
High Battery Load Disconnect (VDC)
|
15.0/30.0
|
|
Temperature Compensation
|
-5mV/°C
|
|
Battery Type Selection
|
VRLA/Flooded—selectable via jumper. Factory default VRLA (jumper inserted)
|
|
Data Logging
|
Internal data logging up to one week, longer data logging available with monitoring software.
|
|
Standby Current (mA)
|
<5
|
|
Peak Efficiency
|
97%
|
|
Display
|
3 LEDs
|
|
IP Class
|
IP20
|
|
Operating Temperature Range
|
-40° to 60° C
|
|
Humidity
|
0-95% RH non-condensing
|
|
Dimensions HxWxD (in/cm)
|
4.3" x 7.8" x 1.8" / 11.0mm x 19.7mm x 4.5mm
|
|
Weight (lb/kg)
|
1.1 / 0.50
|
|
Certifications
|
CE, IEC/EN 62109-1
|
|
Warranty
|
Standard 2 year
|
Documentation
About SmartHarvest
SmartHarvest by OutBack represents a line of renewable energy electronics aimed at meeting the growing global demand for
value-orientated, low power-range renewable energy system components.
Maximum Power Point Tracking (MPPT) Charge Controllers
SmartHarvest's mission is to make the advanced technologies usually associated with premium PV energy systems available
to users regardless of their system size or budget. The SCCM charge controller models accomplish this goal by placing MPPT
charge controller capability within reach of a much wider application base, ensuring higher system yeilds at the power and
size levels where that can advantage can make the most difference.
Pulse-Width Modulation (PMW) Charge Controllers
PMW charge controllers are elegant, proven system solutions. SmartHarvest's SCCP charge controller models scale this
economical solution for use in small PV systems dedicated to specific applications, such as powering a light, appliance or
charging a back-up battery system connected to a smart phone, PC, wireless network adapter or other critical electronic devices.
