OutBack SmartHarvest SCCP05-050 > 5 Amp 12/24 Volt PWM Charge Controller
PWM Charge Controller
Product Highlights
- 5A/50V Pulse-Width Modulation (PWM) charge controller for specific charging applications
- PMW technology for the right balance between economy and performance
- Integrated LED display
- Backed by OutBack Power's global sales and support network
Product Description
The right charge controller for small or singel-purpose Photvoltaic (PV) systems.
PMW charge controllers are an elegant, proven system solutions. SmartHarvest's SCCP05-050 scales this economical solution for use in
small PV systems dedicated to specific applications, such as powering a light, an appliance or charging a back-up battery system connected
to a smart phone, PC, wireless network adapter or other critical electronic device.
PMW charge controllers use advanced digital signal processing to anticipate battery charging needs and affect the right amount of control.
They are an excellent choice for smaller systems operating under consistent solar conditions where utilizing economical PWM technology helps
allocate more of the system budget to other areas such as energy storage. The SCCP05-050 is the perfect charging solution when performance
and economics are of equal priority.
Documentation
|
Maximum Output Current (I)
|
5
|
|
Nominal Battery Voltages
|
12/24
|
|
Input Panel Power (Wp)
|
60/120
|
|
Panel Intelligence
|
PWM
|
|
Maximum Input Voltage (Voc)
|
25/50
|
|
Charging Regulation
|
Four stages: bulk, absorb, float and equalization
|
|
Bulk Voltage (VDC)
|
Flooded: 14.8/29.6 VRLA: 14.6/29.2
|
|
Absorb Voltage (VDC)
|
Flooded: 14.8/29.6 VRLA: 14.4/28.8
|
|
Absorb Time
|
2 hours
|
|
Float Voltage (VDC)
|
Flooded: 13.2/26.4 VRLA: 13.5/27.0
|
|
Equalization Voltage (VDC)
(Flooded Batteries Only)
|
Flooded: 15.5/31.0
|
|
Equalization Time
|
1 hour
|
|
State of Charge Low Voltage
Disconnect (V)
|
11.4/22.8V
|
|
Low Battery Load Reconnect (VDC)
|
12.4/28.8
|
|
High Battery Load Disconnect (VDC)
|
15.0/30.0
|
|
Temperature Compensation
|
-5mV/°C
|
|
Battery Type Selection
|
VRLA/Flooded—selectable via jumper. Factory default VRLA (jumper inserted)
|
|
Data Logging
|
Internal data logging up to one week, longer data logging available with monitoring software.
|
|
Standby Current (mA)
|
6.8
|
|
Display
|
3 LEDs
|
|
IP Class
|
IP20
|
|
Operating Temperature Range
|
-40° to 60° C
|
|
Humidity
|
0-95% RH non-condensing
|
|
Dimensions HxWxD (in/cm)
|
2.6" x 6.3" x 1.0" / 6.8mm x 15.9mm x 2.5mm
|
|
Weight (lb/kg)
|
0.39 / 0.18
|
|
Certifications
|
CE, IEC/EN 62109-1
|
|
Warranty
|
Standard 2 year
|
Documentation
About SmartHarvest
SmartHarvest by OutBack represents a line of renewable energy electronics aimed at meeting the growing global demand for
value-orientated, low power-range renewable energy system components.
Maximum Power Point Tracking (MPPT) Charge Controllers
SmartHarvest's mission is to make the advanced technologies usually associated with premium PV energy systems available
to users regardless of their system size or budget. The SCCM charge controller models accomplish this goal by placing MPPT
charge controller capability within reach of a much wider application base, ensuring higher system yeilds at the power and
size levels where that can advantage can make the most difference.
Pulse-Width Modulation (PWM) Charge Controllers
PMW charge controllers are elegant, proven system solutions. SmartHarvest's SCCP charge controller models scale this
economical solution for use in small PV systems dedicated to specific applications, such as powering a light, appliance or
charging a back-up battery system connected to a smart phone, PC, wireless network adapter or other critical electronic devices.
