Sharp 115 Watt 174 Volt Thin Film Solar Panel
Amorphous / Monocrystalline
MC4 Locking Connector
Manufacturer Part Number: NA-V115H1
Sharp’s thin film product pairs amorphous silicon
with a layer of microcrystalline silicon to achieve
high stability and performance. Produced with
less than one percent of the silicon used in
crystalline solar cells, thin film products offer high
performance with less semiconductor material.
With a low temperature coefficient for output
power, thin film generates greater energy than
its crystalline silicon counterpart in geographic
regions where temperatures are high. In warm
climates, this translates into more kilowatt-hours
Offering one of the most efficient thin film
photovoltaic products ever manufactured,
Sharp becomes the provider of choice for
multi-megawatt-scale power production.
Tandem-junction structure (amorphous silicon/
microcrystalline silicon) captures a wider part of the
solar spectrum, converting more sunlight into electricity.
High Voltage Advantage
Proprietary design increases reliability by minimizing
losses caused by module output variation.
Microcrystalline layer provides superior long-term
stability and higher module efficiency.
Four bypass diodes ensure maximum output under
non-uniform operating conditions.
Single-layer glass with polymeric backskin lowers
pounds per watt and transportation costs. Modules are
sized to optimize the greatest amount of power, easily
handled by one person.
Maximum power (Pmax)||
Open-circuit voltage (Voc)||
Maximum Power Voltage (Vpm)||
Short-circuit current (Isc)||
Maximum Power Current (Ipm)||