Request a Quote!


  Home >

Power-One PVI-3.0-OUTD-US > 3000 Watt Inverter

Power-One 3000 Watt 208/240/277 Volt Inverter - PVI-3.0-OUTD


 
Warranty: 5 Years
Compliance: Buy American


Availability: This item is no longer available.
Product Code: POWER-ONE-PVI-3-0-OUTD
 

Description
 

Power-One PVI 3.0 3000 Watt 208/240/277 Volt Inverter

Transformerless
Manufacturer Part Number: PVI-3.0-OUTD-US

The most common residential inverter is the ideal size for an average-sized family home. This single-phase string inverter complements the typical number of rooftop solar panels, allowing home-owners to get the most efficient energy harvesting for the size of the property.

Features:

  • Dual input section to process two strings with independent MPPT
  • High speed MPPT for real time power tracking and improved energy harvesting
  • Transformerless operation for highest efficiency: up to 96,8% (Euro 96%)
  • Reverse polarity protection minimizes chance of damage due to miswiring
  • True Sine Wave Output
  • Anti-islanding Protection
  • LCD Display on the front to monitor the main parameters
  • Integrated DC switch in compliance with VDE 0100-712 (Germany) and CEI 64-8 V4 (Italy)
  • Standard DC Multi-Contact terminals (model MC4), includes an integrated DC switch (PVI-X.X-OUTD-S)

Specifications

MODEL PVI-3.0-OUTD PVI-3.6-OUTD PVI-4.2-OUTD
INPUT PARAMETERS
Nominal DC Power [kW] 3,12 3,75 4,375
Max. Recommended DC Power [kW] 3,5 4,15 4,82
Operating Input Voltage Range [V] 0,7xVstart - 580 (360 nominal)
Full Power MPPT input voltage range (symmetrical load) [V] 156-530 120-530 140-530
Absolute Max. Input Voltage [V] 600
Activation voltage "Vstart" [V] 200 nominal (adjustable within the range 120Vdc-350Vdc, independently/each input)
No of independent MPPT trackers 2
Max. Input Power, each MPPT [kW] 2 3
No. of DC Inputs 2
1/ MPPT
3
2 / MPPT1
1 / MPPT2
Max. DC Current, each MPPT [A] 10 16
DC Connection 4 (2 pos, 2 neg) 6 (3 pos, 3 neg)
MultiContact Ø 4mm (male - positive input + female - negative input)
Mating cable connector included
Conductor cross section: 4-6mmq/AWG12-10 - Cable Ø w/insulator: 3-6mm
INPUT PROTECTION
Reverse polarity protection Yes
Fuse rating, each input (-FS suffix versions only) NA NA NA
Thermally Protected DC side varistor 4
2 / MPPT
PV array Insulation Control according to VDE0126-1-1
DC Switch (-S/-FS suffix versions only) Integrated (Max. Voltage Rating : 600Vdc / Max Current Rating: 25A)
OUTPUT PARAMETERS
Nominal AC Power [up to 50°C, kW] 3 3.6 4.2
Max. AC Power [kW] 3.3 3.96 4.6
AC Grid Connection single phase ( Live, Neutral, PE )
Nominal AC Voltage Range [V] 200-245 (230 nominal)
Maximum AC Voltage Range [V] 180-264 (may vary to comply with local regulation)
Nominal AC Frequency [Hz] 50
Max. AC Line Current [A] 14,5 17,2 20
AC Connection Screw terminal block
Conductor cross section: Solid 0,5-16mmq / Stranded: 0,5-10mmq / AWG20-6
Cable Gland: M32 - Cable Ø: 13-21mm
Line Power Factor 1
AC Current Distortion [THD%] <3,5% at rated power with sine wave voltage
OUTPUT PROTECTION
AC side varistors 2 ( Live - Neutral / Live - PE )
Ground fault protection (AC + DC leakage current) according to VDE0126-1-1
CONVERSION EFFICIENCY
Max. Efficiency 96,80%
Euro Efficiency 96%

Detailed Description:

This rugged outdoor inverter has been designed as a completely sealed unit to withstand the harshest environmental conditions. One of the key benefits of this inverter is the dual input section to process two strings with independent MPPT especially useful for rooftop installations with two different orientations (ie East and West). The high speed MPPT offers real-time power tracking and improved energy harvesting. The transformerless operation gives the highest efficiency of up to 96.8%. The wide input voltage range makes the inverter suitable to low power installations with reduced string size.


Share your knowledge of this product with other customers... Be the first to write a review