Request a Quote!


  Home > Solar Combiner Boxes > Midnite Solar Combiners >

Midnite Solar MNPV16HV-DLTL 4X-PSB > 8 String Disconnecting Combiner with Power Supply Board / NEMA 4X

Midnite Solar MNPV16HV-DLTL 4X-PSB > 8 String Disconnecting Combiner with Power Supply Board / NEMA 4X


 
Warranty: 5 Years
Compliance: Buy American

Stock Status:(Out of Stock)

Availability: Currently Unavailable
Product Code: MIDNITE-MNPV16HV-DLTL-4X-PSB
 

Description Datasheet
 

Midnite Solar 8 String Disconnecting Combiner with Power Supply Board - Rapid Shutdown System

Midnite Solar MNPV16HV-DLTL 4X Disconnecting Combiner, 2 Pole, 2 Channel, 160 amps or 175 amps for busbars and switch.
DLTL is set up for 8 strings in and 2 strings out for Dual MPPT on transformerless

Model MNPV16HV-DLTL 4X-PSB
Series PV Disconnecting Combiners - Birdhouse Compatible
Manufacturer Midnite Solar
Dimensions 26"L X 24"W X 6"D
Weight 25 lbs
Enclosure NEMA 4X

Detailed Description

The MNPV16HV-DLTL 4X’s red handled is LOCKABLE IN THE OFF POSITION!

8 strings into the combiner with 2 separate 60 amp strings out. Specifically designed for the new dual channel MPPT on the transformer-less inverters. This configuration will break the Positive and Negative of 2 separate 600vdc strings.

The difference between the regular Disco combiner and the DLTL version is that the MNPV16HV-Disco-4X is made for a single 16 string inverter, Two 8 sting inverters or one 8 string transformerless where as the DLTL is set up for 8 strings in and 2 strings out for Dual MPPT on transformerless

  • Rapid Shutdown System compliant
  • Birdhouse compatible
  • Type 4X aluminum enclosure (No Rust)
  • Number of Fuse Holders (MNTS) included - 16
  • Fuses included
  • Current Rating - 120A
  • Max. Output Wire Size - 2/0
  • Output Circuits - 2
  • 90 degree C connections
  • 1/2 strain reliefs (MNSR-1000) included
  • Meets 2014 NEC 690.12
  • See through dead front and color coded bus bar guards
  • #6 AWG internal wiring
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA

Hardware Included:

  • 16 - 1/2" strain reliefs (MNSR-1000)
  • 21 - 1/2" NUT MNT 14
  • 9 - HOLE PLUG 1/2" NPT (MNHOLE PLUG 1/2)
  • 9 - GASKET 1/2"
  • One BLUE WRENCH (MNWRENCH)

Additional Description:
SMA requested MidNite Solar to design and build these DLTL combiners. There are 8 strings entering the combiner with 2 separate strings out. Specifically designed for the new dual channel MPPT on the transformer-less inverters.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Combiner Boxes > Midnite Solar Combiners
Solar Combiner Boxes > Disconnecting Combiners
Solar Combiner Boxes
ARRA