Request a Quote!


  Home >

Magnum Energy MS4048-20B > 4000 Watt 48 VDC 120 VAC Off-Grid Inverter with 20A Breakers

Magnum Energy MS4048 > 4000 Watt 48 VDC 120 VAC Off-Grid Inverter with 20A Breakers
Magnum Energy 4000 Watt 48 Volt Pure Sine Wave Inverter with 20A Breakers


 
Warranty: 3 Years

Stock Status:(Out of Stock)

Availability: This product is not longer available.
Product Code: MAGNUM-MS4048-20B
 

Description Datasheet
 

Magnum Energy 4400 Watt 48 VDC 120 VAC Off-Grid Inverter with 20A Breakers

Pure Sine Wave
Manufacturer Part Number: MS4048-20B

Features

  • Magnum Energy 4000 Watt Inverter / 60 Amp PFC Charger 48VDC
  • Pure Sine Wave
  • 4000 Watts Continuous Power
  • 8000 Watts Surge Capacity
  • 48VDC Input
  • 60 Amp Five Stage DC Charger
  • Ideal for RV or Marine Applications
  • Optional Remote Control
  • Overcurrent Protection
  • Overtemperature Protection
  • Three Year Warranty

Specifications

Waveform Pure Sine Wave
Input Battery Voltage Range
Nominal AC Output Voltage 120 VAC ± 5%
Output Frequency and Accuracy 60 Hz +/- 0.1%
Total Harmonic Distortion (THD) < 5%
Continuous Power Output at 25° C 4000 VA
Maximum continuous input current
Peak Inverter Efficiency 87%
Dimensions (L x W x H) 19" x 18" x 13"
Weight 58 lbs

Detailed Description

The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter / chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.101 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.


Accessories
Magnum Energy ME-AGS-N > AGS Controller > Network Version

Add
Magnum Energy AGS Controller - Network Version - ME-AGS-N

Share your knowledge of this product with other customers... Be the first to write a review