Enphase > Bulk Q Cable, 12 AWG, No Connectors / 240 VAC / for 60/72 cell modules - IQ System - 1 Foot

Note: Minimum quantity of 10 feet must be ordered for Enphase Q-12-RAW Bulk Q Cable. Bulk Roll quantity is 984' (300 meters)

Enphase-Q-12-Raw Cable is used to span distances. Enphase-Q-12-Raw Cable is without integrated AC connectors for runs between separated arrays or to a junction box located some distance away from an array.

The Enphase IQ Microinverter system uses a new and improved cabling system. The Enphase-Q-12-Raw Cable is DG type and contains only two #12 AWG line conductors. The Q Cable male connectors plug directly into the IQ Micros, whose double insulation rating requires no neutral or ground conductors. This lightweight cable drives down system costs while simplifying installation.

The Enphase-Q-12-Raw Cable eliminates the need for empty drops and watertight caps by allowing you to make your own wire runs with the field wire-able connectors. Use the male fittings to connect to the aggregator and the female connectors to connect to the last drop on the array.

Specifications