Enphase 210 Watt 240 VAC Micro Inverter
Enphase M210 micro inverters remain in the company's portfolio to accommodate 72 and 84 cell modules. For 60 cell modules, the M215 is recommended.
||Grid Tie - Micro Inverter
|Ambient Temperature Range
|Operating Temperature Range
||-40°C to 65°C
||Outdoor - NEMA 6
|Dimensions (W x H x D)
||8" x 5.25" x 1.25"
|Recommended PV Power (STC)
|Peak Power Tracking Voltage
||31 V - 50 V
|Min/Max Start Voltage
||32 V / 62 V
|Maximum Output Power
||211 V - 264 V
- Integrated monitoring and powerline communications
- 15 year warranty
- 14AWG integrated cable for 15A branch circuit
- NEMA 6 enclosure rating
- CSA listed per UL 1741/IEE1547
- 95.5% CEC efficiency
- Works with 72- and 84-cell modules
- Recommended module power: 240W
The Enphase M190 & M210 Microinverters are connected to individual PV modules and perform maximum power point tracking (MPPT) and DC-to-AC power conversion.
Both the M190 & M210 make installation simple with a built-in cable that connects microinverters end-to-end to form an AC branch circuit.
The M190 & M210 remain in Enphase's product portfolio in order to support 72-cell PV modules and SunPower and Sanyo modules, which are not supported by the M215. However, the companya nticipates the M215 to serve 100% of 60-cell modules, including the high power 250W and 260W modules offered by some manufacturers. Going forward, Enphase recommends that you design all installations of 60-cell modules to use the M215 product.